Total
2978 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-26585 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: tls: fix race between tx work scheduling and socket close Similarly to previous commit, the submitting thread (recvmsg/sendmsg) may exit as soon as the async crypto handler calls complete(). Reorder scheduling the work before calling complete(). This seems more logical in the first place, as it's the inverse order of what the submitting thread will do. | |||||
| CVE-2024-26583 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: tls: fix race between async notify and socket close The submitting thread (one which called recvmsg/sendmsg) may exit as soon as the async crypto handler calls complete() so any code past that point risks touching already freed data. Try to avoid the locking and extra flags altogether. Have the main thread hold an extra reference, this way we can depend solely on the atomic ref counter for synchronization. Don't futz with reiniting the completion, either, we are now tightly controlling when completion fires. | |||||
| CVE-2023-53615 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix deletion race condition System crash when using debug kernel due to link list corruption. The cause of the link list corruption is due to session deletion was allowed to queue up twice. Here's the internal trace that show the same port was allowed to double queue for deletion on different cpu. 20808683956 015 qla2xxx [0000:13:00.1]-e801:4: Scheduling sess ffff93ebf9306800 for deletion 50:06:0e:80:12:48:ff:50 fc4_type 1 20808683957 027 qla2xxx [0000:13:00.1]-e801:4: Scheduling sess ffff93ebf9306800 for deletion 50:06:0e:80:12:48:ff:50 fc4_type 1 Move the clearing/setting of deleted flag lock. | |||||
| CVE-2023-53490 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix disconnect vs accept race Despite commit 0ad529d9fd2b ("mptcp: fix possible divide by zero in recvmsg()"), the mptcp protocol is still prone to a race between disconnect() (or shutdown) and accept. The root cause is that the mentioned commit checks the msk-level flag, but mptcp_stream_accept() does acquire the msk-level lock, as it can rely directly on the first subflow lock. As reported by Christoph than can lead to a race where an msk socket is accepted after that mptcp_subflow_queue_clean() releases the listener socket lock and just before it takes destructive actions leading to the following splat: BUG: kernel NULL pointer dereference, address: 0000000000000012 PGD 5a4ca067 P4D 5a4ca067 PUD 37d4c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP CPU: 2 PID: 10955 Comm: syz-executor.5 Not tainted 6.5.0-rc1-gdc7b257ee5dd #37 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:mptcp_stream_accept+0x1ee/0x2f0 include/net/inet_sock.h:330 Code: 0a 09 00 48 8b 1b 4c 39 e3 74 07 e8 bc 7c 7f fe eb a1 e8 b5 7c 7f fe 4c 8b 6c 24 08 eb 05 e8 a9 7c 7f fe 49 8b 85 d8 09 00 00 <0f> b6 40 12 88 44 24 07 0f b6 6c 24 07 bf 07 00 00 00 89 ee e8 89 RSP: 0018:ffffc90000d07dc0 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff888037e8d020 RCX: ffff88803b093300 RDX: 0000000000000000 RSI: ffffffff833822c5 RDI: ffffffff8333896a RBP: 0000607f82031520 R08: ffff88803b093300 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000003e83 R12: ffff888037e8d020 R13: ffff888037e8c680 R14: ffff888009af7900 R15: ffff888009af6880 FS: 00007fc26d708640(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000012 CR3: 0000000066bc5001 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> do_accept+0x1ae/0x260 net/socket.c:1872 __sys_accept4+0x9b/0x110 net/socket.c:1913 __do_sys_accept4 net/socket.c:1954 [inline] __se_sys_accept4 net/socket.c:1951 [inline] __x64_sys_accept4+0x20/0x30 net/socket.c:1951 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Address the issue by temporary removing the pending request socket from the accept queue, so that racing accept() can't touch them. After depleting the msk - the ssk still exists, as plain TCP sockets, re-insert them into the accept queue, so that later inet_csk_listen_stop() will complete the tcp socket disposal. | |||||
| CVE-2023-53478 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: tracing/synthetic: Fix races on freeing last_cmd Currently, the "last_cmd" variable can be accessed by multiple processes asynchronously when multiple users manipulate synthetic_events node at the same time, it could lead to use-after-free or double-free. This patch add "lastcmd_mutex" to prevent "last_cmd" from being accessed asynchronously. ================================================================ It's easy to reproduce in the KASAN environment by running the two scripts below in different shells. script 1: while : do echo -n -e '\x88' > /sys/kernel/tracing/synthetic_events done script 2: while : do echo -n -e '\xb0' > /sys/kernel/tracing/synthetic_events done ================================================================ double-free scenario: process A process B ------------------- --------------- 1.kstrdup last_cmd 2.free last_cmd 3.free last_cmd(double-free) ================================================================ use-after-free scenario: process A process B ------------------- --------------- 1.kstrdup last_cmd 2.free last_cmd 3.tracing_log_err(use-after-free) ================================================================ Appendix 1. KASAN report double-free: BUG: KASAN: double-free in kfree+0xdc/0x1d4 Free of addr ***** by task sh/4879 Call trace: ... kfree+0xdc/0x1d4 create_or_delete_synth_event+0x60/0x1e8 trace_parse_run_command+0x2bc/0x4b8 synth_events_write+0x20/0x30 vfs_write+0x200/0x830 ... Allocated by task 4879: ... kstrdup+0x5c/0x98 create_or_delete_synth_event+0x6c/0x1e8 trace_parse_run_command+0x2bc/0x4b8 synth_events_write+0x20/0x30 vfs_write+0x200/0x830 ... Freed by task 5464: ... kfree+0xdc/0x1d4 create_or_delete_synth_event+0x60/0x1e8 trace_parse_run_command+0x2bc/0x4b8 synth_events_write+0x20/0x30 vfs_write+0x200/0x830 ... ================================================================ Appendix 2. KASAN report use-after-free: BUG: KASAN: use-after-free in strlen+0x5c/0x7c Read of size 1 at addr ***** by task sh/5483 sh: CPU: 7 PID: 5483 Comm: sh ... __asan_report_load1_noabort+0x34/0x44 strlen+0x5c/0x7c tracing_log_err+0x60/0x444 create_or_delete_synth_event+0xc4/0x204 trace_parse_run_command+0x2bc/0x4b8 synth_events_write+0x20/0x30 vfs_write+0x200/0x830 ... Allocated by task 5483: ... kstrdup+0x5c/0x98 create_or_delete_synth_event+0x80/0x204 trace_parse_run_command+0x2bc/0x4b8 synth_events_write+0x20/0x30 vfs_write+0x200/0x830 ... Freed by task 5480: ... kfree+0xdc/0x1d4 create_or_delete_synth_event+0x74/0x204 trace_parse_run_command+0x2bc/0x4b8 synth_events_write+0x20/0x30 vfs_write+0x200/0x830 ... | |||||
| CVE-2023-53178 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mm: fix zswap writeback race condition The zswap writeback mechanism can cause a race condition resulting in memory corruption, where a swapped out page gets swapped in with data that was written to a different page. The race unfolds like this: 1. a page with data A and swap offset X is stored in zswap 2. page A is removed off the LRU by zpool driver for writeback in zswap-shrink work, data for A is mapped by zpool driver 3. user space program faults and invalidates page entry A, offset X is considered free 4. kswapd stores page B at offset X in zswap (zswap could also be full, if so, page B would then be IOed to X, then skip step 5.) 5. entry A is replaced by B in tree->rbroot, this doesn't affect the local reference held by zswap-shrink work 6. zswap-shrink work writes back A at X, and frees zswap entry A 7. swapin of slot X brings A in memory instead of B The fix: Once the swap page cache has been allocated (case ZSWAP_SWAPCACHE_NEW), zswap-shrink work just checks that the local zswap_entry reference is still the same as the one in the tree. If it's not the same it means that it's either been invalidated or replaced, in both cases the writeback is aborted because the local entry contains stale data. Reproducer: I originally found this by running `stress` overnight to validate my work on the zswap writeback mechanism, it manifested after hours on my test machine. The key to make it happen is having zswap writebacks, so whatever setup pumps /sys/kernel/debug/zswap/written_back_pages should do the trick. In order to reproduce this faster on a vm, I setup a system with ~100M of available memory and a 500M swap file, then running `stress --vm 1 --vm-bytes 300000000 --vm-stride 4000` makes it happen in matter of tens of minutes. One can speed things up even more by swinging /sys/module/zswap/parameters/max_pool_percent up and down between, say, 20 and 1; this makes it reproduce in tens of seconds. It's crucial to set `--vm-stride` to something other than 4096 otherwise `stress` won't realize that memory has been corrupted because all pages would have the same data. | |||||
| CVE-2023-53094 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: fsl_lpuart: fix race on RX DMA shutdown From time to time DMA completion can come in the middle of DMA shutdown: <process ctx>: <IRQ>: lpuart32_shutdown() lpuart_dma_shutdown() del_timer_sync() lpuart_dma_rx_complete() lpuart_copy_rx_to_tty() mod_timer() lpuart_dma_rx_free() When the timer fires a bit later, sport->dma_rx_desc is NULL: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 pc : lpuart_copy_rx_to_tty+0xcc/0x5bc lr : lpuart_timer_func+0x1c/0x2c Call trace: lpuart_copy_rx_to_tty lpuart_timer_func call_timer_fn __run_timers.part.0 run_timer_softirq __do_softirq __irq_exit_rcu irq_exit handle_domain_irq gic_handle_irq call_on_irq_stack do_interrupt_handler ... To fix this fold del_timer_sync() into lpuart_dma_rx_free() after dmaengine_terminate_sync() to make sure timer will not be re-started in lpuart_copy_rx_to_tty() <= lpuart_dma_rx_complete(). | |||||
| CVE-2023-53047 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: tee: amdtee: fix race condition in amdtee_open_session There is a potential race condition in amdtee_open_session that may lead to use-after-free. For instance, in amdtee_open_session() after sess->sess_mask is set, and before setting: sess->session_info[i] = session_info; if amdtee_close_session() closes this same session, then 'sess' data structure will be released, causing kernel panic when 'sess' is accessed within amdtee_open_session(). The solution is to set the bit sess->sess_mask as the last step in amdtee_open_session(). | |||||
| CVE-2023-53046 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix race condition in hci_cmd_sync_clear There is a potential race condition in hci_cmd_sync_work and hci_cmd_sync_clear, and could lead to use-after-free. For instance, hci_cmd_sync_work is added to the 'req_workqueue' after cancel_work_sync The entry of 'cmd_sync_work_list' may be freed in hci_cmd_sync_clear, and causing kernel panic when it is used in 'hci_cmd_sync_work'. Here's the call trace: dump_stack_lvl+0x49/0x63 print_report.cold+0x5e/0x5d3 ? hci_cmd_sync_work+0x282/0x320 kasan_report+0xaa/0x120 ? hci_cmd_sync_work+0x282/0x320 __asan_report_load8_noabort+0x14/0x20 hci_cmd_sync_work+0x282/0x320 process_one_work+0x77b/0x11c0 ? _raw_spin_lock_irq+0x8e/0xf0 worker_thread+0x544/0x1180 ? poll_idle+0x1e0/0x1e0 kthread+0x285/0x320 ? process_one_work+0x11c0/0x11c0 ? kthread_complete_and_exit+0x30/0x30 ret_from_fork+0x22/0x30 </TASK> Allocated by task 266: kasan_save_stack+0x26/0x50 __kasan_kmalloc+0xae/0xe0 kmem_cache_alloc_trace+0x191/0x350 hci_cmd_sync_queue+0x97/0x2b0 hci_update_passive_scan+0x176/0x1d0 le_conn_complete_evt+0x1b5/0x1a00 hci_le_conn_complete_evt+0x234/0x340 hci_le_meta_evt+0x231/0x4e0 hci_event_packet+0x4c5/0xf00 hci_rx_work+0x37d/0x880 process_one_work+0x77b/0x11c0 worker_thread+0x544/0x1180 kthread+0x285/0x320 ret_from_fork+0x22/0x30 Freed by task 269: kasan_save_stack+0x26/0x50 kasan_set_track+0x25/0x40 kasan_set_free_info+0x24/0x40 ____kasan_slab_free+0x176/0x1c0 __kasan_slab_free+0x12/0x20 slab_free_freelist_hook+0x95/0x1a0 kfree+0xba/0x2f0 hci_cmd_sync_clear+0x14c/0x210 hci_unregister_dev+0xff/0x440 vhci_release+0x7b/0xf0 __fput+0x1f3/0x970 ____fput+0xe/0x20 task_work_run+0xd4/0x160 do_exit+0x8b0/0x22a0 do_group_exit+0xba/0x2a0 get_signal+0x1e4a/0x25b0 arch_do_signal_or_restart+0x93/0x1f80 exit_to_user_mode_prepare+0xf5/0x1a0 syscall_exit_to_user_mode+0x26/0x50 ret_from_fork+0x15/0x30 | |||||
| CVE-2023-52934 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mm/MADV_COLLAPSE: catch !none !huge !bad pmd lookups In commit 34488399fa08 ("mm/madvise: add file and shmem support to MADV_COLLAPSE") we make the following change to find_pmd_or_thp_or_none(): - if (!pmd_present(pmde)) - return SCAN_PMD_NULL; + if (pmd_none(pmde)) + return SCAN_PMD_NONE; This was for-use by MADV_COLLAPSE file/shmem codepaths, where MADV_COLLAPSE might identify a pte-mapped hugepage, only to have khugepaged race-in, free the pte table, and clear the pmd. Such codepaths include: A) If we find a suitably-aligned compound page of order HPAGE_PMD_ORDER already in the pagecache. B) In retract_page_tables(), if we fail to grab mmap_lock for the target mm/address. In these cases, collapse_pte_mapped_thp() really does expect a none (not just !present) pmd, and we want to suitably identify that case separate from the case where no pmd is found, or it's a bad-pmd (of course, many things could happen once we drop mmap_lock, and the pmd could plausibly undergo multiple transitions due to intervening fault, split, etc). Regardless, the code is prepared install a huge-pmd only when the existing pmd entry is either a genuine pte-table-mapping-pmd, or the none-pmd. However, the commit introduces a logical hole; namely, that we've allowed !none- && !huge- && !bad-pmds to be classified as genuine pte-table-mapping-pmds. One such example that could leak through are swap entries. The pmd values aren't checked again before use in pte_offset_map_lock(), which is expecting nothing less than a genuine pte-table-mapping-pmd. We want to put back the !pmd_present() check (below the pmd_none() check), but need to be careful to deal with subtleties in pmd transitions and treatments by various arch. The issue is that __split_huge_pmd_locked() temporarily clears the present bit (or otherwise marks the entry as invalid), but pmd_present() and pmd_trans_huge() still need to return true while the pmd is in this transitory state. For example, x86's pmd_present() also checks the _PAGE_PSE , riscv's version also checks the _PAGE_LEAF bit, and arm64 also checks a PMD_PRESENT_INVALID bit. Covering all 4 cases for x86 (all checks done on the same pmd value): 1) pmd_present() && pmd_trans_huge() All we actually know here is that the PSE bit is set. Either: a) We aren't racing with __split_huge_page(), and PRESENT or PROTNONE is set. => huge-pmd b) We are currently racing with __split_huge_page(). The danger here is that we proceed as-if we have a huge-pmd, but really we are looking at a pte-mapping-pmd. So, what is the risk of this danger? The only relevant path is: madvise_collapse() -> collapse_pte_mapped_thp() Where we might just incorrectly report back "success", when really the memory isn't pmd-backed. This is fine, since split could happen immediately after (actually) successful madvise_collapse(). So, it should be safe to just assume huge-pmd here. 2) pmd_present() && !pmd_trans_huge() Either: a) PSE not set and either PRESENT or PROTNONE is. => pte-table-mapping pmd (or PROT_NONE) b) devmap. This routine can be called immediately after unlocking/locking mmap_lock -- or called with no locks held (see khugepaged_scan_mm_slot()), so previous VMA checks have since been invalidated. 3) !pmd_present() && pmd_trans_huge() Not possible. 4) !pmd_present() && !pmd_trans_huge() Neither PRESENT nor PROTNONE set => not present I've checked all archs that implement pmd_trans_huge() (arm64, riscv, powerpc, longarch, x86, mips, s390) and this logic roughly translates (though devmap treatment is unique to x86 and powerpc, and (3) doesn't necessarily hold in general -- but that doesn't matter since !pmd_present() always takes failure path). Also, add a comment above find_pmd_or_thp_or_none() ---truncated--- | |||||
| CVE-2023-52872 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: fix race condition in status line change on dead connections gsm_cleanup_mux() cleans up the gsm by closing all DLCIs, stopping all timers, removing the virtual tty devices and clearing the data queues. This procedure, however, may cause subsequent changes of the virtual modem status lines of a DLCI. More data is being added the outgoing data queue and the deleted kick timer is restarted to handle this. At this point many resources have already been removed by the cleanup procedure. Thus, a kernel panic occurs. Fix this by proving in gsm_modem_update() that the cleanup procedure has not been started and the mux is still alive. Note that writing to a virtual tty is already protected by checks against the DLCI specific connection state. | |||||
| CVE-2023-52847 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: media: bttv: fix use after free error due to btv->timeout timer There may be some a race condition between timer function bttv_irq_timeout and bttv_remove. The timer is setup in probe and there is no timer_delete operation in remove function. When it hit kfree btv, the function might still be invoked, which will cause use after free bug. This bug is found by static analysis, it may be false positive. Fix it by adding del_timer_sync invoking to the remove function. cpu0 cpu1 bttv_probe ->timer_setup ->bttv_set_dma ->mod_timer; bttv_remove ->kfree(btv); ->bttv_irq_timeout ->USE btv | |||||
| CVE-2023-52825 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix a race condition of vram buffer unref in svm code prange->svm_bo unref can happen in both mmu callback and a callback after migrate to system ram. Both are async call in different tasks. Sync svm_bo unref operation to avoid random "use-after-free". | |||||
| CVE-2023-52517 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: spi: sun6i: fix race between DMA RX transfer completion and RX FIFO drain Previously the transfer complete IRQ immediately drained to RX FIFO to read any data remaining in FIFO to the RX buffer. This behaviour is correct when dealing with SPI in interrupt mode. However in DMA mode the transfer complete interrupt still fires as soon as all bytes to be transferred have been stored in the FIFO. At that point data in the FIFO still needs to be picked up by the DMA engine. Thus the drain procedure and DMA engine end up racing to read from RX FIFO, corrupting any data read. Additionally the RX buffer pointer is never adjusted according to DMA progress in DMA mode, thus calling the RX FIFO drain procedure in DMA mode is a bug. Fix corruptions in DMA RX mode by draining RX FIFO only in interrupt mode. Also wait for completion of RX DMA when in DMA mode before returning to ensure all data has been copied to the supplied memory buffer. | |||||
| CVE-2023-52502 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: nfc: fix races in nfc_llcp_sock_get() and nfc_llcp_sock_get_sn() Sili Luo reported a race in nfc_llcp_sock_get(), leading to UAF. Getting a reference on the socket found in a lookup while holding a lock should happen before releasing the lock. nfc_llcp_sock_get_sn() has a similar problem. Finally nfc_llcp_recv_snl() needs to make sure the socket found by nfc_llcp_sock_from_sn() does not disappear. | |||||
| CVE-2022-50373 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: fs: dlm: fix race in lowcomms This patch fixes a race between queue_work() in _dlm_lowcomms_commit_msg() and srcu_read_unlock(). The queue_work() can take the final reference of a dlm_msg and so msg->idx can contain garbage which is signaled by the following warning: [ 676.237050] ------------[ cut here ]------------ [ 676.237052] WARNING: CPU: 0 PID: 1060 at include/linux/srcu.h:189 dlm_lowcomms_commit_msg+0x41/0x50 [ 676.238945] Modules linked in: dlm_locktorture torture rpcsec_gss_krb5 intel_rapl_msr intel_rapl_common iTCO_wdt iTCO_vendor_support qxl kvm_intel drm_ttm_helper vmw_vsock_virtio_transport kvm vmw_vsock_virtio_transport_common ttm irqbypass crc32_pclmul joydev crc32c_intel serio_raw drm_kms_helper vsock virtio_scsi virtio_console virtio_balloon snd_pcm drm syscopyarea sysfillrect sysimgblt snd_timer fb_sys_fops i2c_i801 lpc_ich snd i2c_smbus soundcore pcspkr [ 676.244227] CPU: 0 PID: 1060 Comm: lock_torture_wr Not tainted 5.19.0-rc3+ #1546 [ 676.245216] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-2.module+el8.7.0+15506+033991b0 04/01/2014 [ 676.246460] RIP: 0010:dlm_lowcomms_commit_msg+0x41/0x50 [ 676.247132] Code: fe ff ff ff 75 24 48 c7 c6 bd 0f 49 bb 48 c7 c7 38 7c 01 bd e8 00 e7 ca ff 89 de 48 c7 c7 60 78 01 bd e8 42 3d cd ff 5b 5d c3 <0f> 0b eb d8 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 [ 676.249253] RSP: 0018:ffffa401c18ffc68 EFLAGS: 00010282 [ 676.249855] RAX: 0000000000000001 RBX: 00000000ffff8b76 RCX: 0000000000000006 [ 676.250713] RDX: 0000000000000000 RSI: ffffffffbccf3a10 RDI: ffffffffbcc7b62e [ 676.251610] RBP: ffffa401c18ffc70 R08: 0000000000000001 R09: 0000000000000001 [ 676.252481] R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000005 [ 676.253421] R13: ffff8b76786ec370 R14: ffff8b76786ec370 R15: ffff8b76786ec480 [ 676.254257] FS: 0000000000000000(0000) GS:ffff8b7777800000(0000) knlGS:0000000000000000 [ 676.255239] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 676.255897] CR2: 00005590205d88b8 CR3: 000000017656c003 CR4: 0000000000770ee0 [ 676.256734] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 676.257567] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 676.258397] PKRU: 55555554 [ 676.258729] Call Trace: [ 676.259063] <TASK> [ 676.259354] dlm_midcomms_commit_mhandle+0xcc/0x110 [ 676.259964] queue_bast+0x8b/0xb0 [ 676.260423] grant_pending_locks+0x166/0x1b0 [ 676.261007] _unlock_lock+0x75/0x90 [ 676.261469] unlock_lock.isra.57+0x62/0xa0 [ 676.262009] dlm_unlock+0x21e/0x330 [ 676.262457] ? lock_torture_stats+0x80/0x80 [dlm_locktorture] [ 676.263183] torture_unlock+0x5a/0x90 [dlm_locktorture] [ 676.263815] ? preempt_count_sub+0xba/0x100 [ 676.264361] ? complete+0x1d/0x60 [ 676.264777] lock_torture_writer+0xb8/0x150 [dlm_locktorture] [ 676.265555] kthread+0x10a/0x130 [ 676.266007] ? kthread_complete_and_exit+0x20/0x20 [ 676.266616] ret_from_fork+0x22/0x30 [ 676.267097] </TASK> [ 676.267381] irq event stamp: 9579855 [ 676.267824] hardirqs last enabled at (9579863): [<ffffffffbb14e6f8>] __up_console_sem+0x58/0x60 [ 676.268896] hardirqs last disabled at (9579872): [<ffffffffbb14e6dd>] __up_console_sem+0x3d/0x60 [ 676.270008] softirqs last enabled at (9579798): [<ffffffffbc200349>] __do_softirq+0x349/0x4c7 [ 676.271438] softirqs last disabled at (9579897): [<ffffffffbb0d54c0>] irq_exit_rcu+0xb0/0xf0 [ 676.272796] ---[ end trace 0000000000000000 ]--- I reproduced this warning with dlm_locktorture test which is currently not upstream. However this patch fix the issue by make a additional refcount between dlm_lowcomms_new_msg() and dlm_lowcomms_commit_msg(). In case of the race the kref_put() in dlm_lowcomms_commit_msg() will be the final put. | |||||
| CVE-2022-50350 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix a race condition between login_work and the login thread In case a malicious initiator sends some random data immediately after a login PDU; the iscsi_target_sk_data_ready() callback will schedule the login_work and, at the same time, the negotiation may end without clearing the LOGIN_FLAGS_INITIAL_PDU flag (because no additional PDU exchanges are required to complete the login). The login has been completed but the login_work function will find the LOGIN_FLAGS_INITIAL_PDU flag set and will never stop from rescheduling itself; at this point, if the initiator drops the connection, the iscsit_conn structure will be freed, login_work will dereference a released socket structure and the kernel crashes. BUG: kernel NULL pointer dereference, address: 0000000000000230 PF: supervisor write access in kernel mode PF: error_code(0x0002) - not-present page Workqueue: events iscsi_target_do_login_rx [iscsi_target_mod] RIP: 0010:_raw_read_lock_bh+0x15/0x30 Call trace: iscsi_target_do_login_rx+0x75/0x3f0 [iscsi_target_mod] process_one_work+0x1e8/0x3c0 Fix this bug by forcing login_work to stop after the login has been completed and the socket callbacks have been restored. Add a comment to clearify the return values of iscsi_target_do_login() | |||||
| CVE-2022-50339 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: avoid hci_dev_test_and_set_flag() in mgmt_init_hdev() syzbot is again reporting attempt to cancel uninitialized work at mgmt_index_removed() [1], for setting of HCI_MGMT flag from mgmt_init_hdev() from hci_mgmt_cmd() from hci_sock_sendmsg() can race with testing of HCI_MGMT flag from mgmt_index_removed() from hci_sock_bind() due to lack of serialization via hci_dev_lock(). Since mgmt_init_hdev() is called with mgmt_chan_list_lock held, we can safely split hci_dev_test_and_set_flag() into hci_dev_test_flag() and hci_dev_set_flag(). Thus, in order to close this race, set HCI_MGMT flag after INIT_DELAYED_WORK() completed. This is a local fix based on mgmt_chan_list_lock. Lack of serialization via hci_dev_lock() might be causing different race conditions somewhere else. But a global fix based on hci_dev_lock() should deserve a future patch. | |||||
| CVE-2022-50014 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mm/gup: fix FOLL_FORCE COW security issue and remove FOLL_COW Ever since the Dirty COW (CVE-2016-5195) security issue happened, we know that FOLL_FORCE can be possibly dangerous, especially if there are races that can be exploited by user space. Right now, it would be sufficient to have some code that sets a PTE of a R/O-mapped shared page dirty, in order for it to erroneously become writable by FOLL_FORCE. The implications of setting a write-protected PTE dirty might not be immediately obvious to everyone. And in fact ever since commit 9ae0f87d009c ("mm/shmem: unconditionally set pte dirty in mfill_atomic_install_pte"), we can use UFFDIO_CONTINUE to map a shmem page R/O while marking the pte dirty. This can be used by unprivileged user space to modify tmpfs/shmem file content even if the user does not have write permissions to the file, and to bypass memfd write sealing -- Dirty COW restricted to tmpfs/shmem (CVE-2022-2590). To fix such security issues for good, the insight is that we really only need that fancy retry logic (FOLL_COW) for COW mappings that are not writable (!VM_WRITE). And in a COW mapping, we really only broke COW if we have an exclusive anonymous page mapped. If we have something else mapped, or the mapped anonymous page might be shared (!PageAnonExclusive), we have to trigger a write fault to break COW. If we don't find an exclusive anonymous page when we retry, we have to trigger COW breaking once again because something intervened. Let's move away from this mandatory-retry + dirty handling and rely on our PageAnonExclusive() flag for making a similar decision, to use the same COW logic as in other kernel parts here as well. In case we stumble over a PTE in a COW mapping that does not map an exclusive anonymous page, COW was not properly broken and we have to trigger a fake write-fault to break COW. Just like we do in can_change_pte_writable() added via commit 64fe24a3e05e ("mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection") and commit 76aefad628aa ("mm/mprotect: fix soft-dirty check in can_change_pte_writable()"), take care of softdirty and uffd-wp manually. For example, a write() via /proc/self/mem to a uffd-wp-protected range has to fail instead of silently granting write access and bypassing the userspace fault handler. Note that FOLL_FORCE is not only used for debug access, but also triggered by applications without debug intentions, for example, when pinning pages via RDMA. This fixes CVE-2022-2590. Note that only x86_64 and aarch64 are affected, because only those support CONFIG_HAVE_ARCH_USERFAULTFD_MINOR. Fortunately, FOLL_COW is no longer required to handle FOLL_FORCE. So let's just get rid of it. Thanks to Nadav Amit for pointing out that the pte_dirty() check in FOLL_FORCE code is problematic and might be exploitable. Note 1: We don't check for the PTE being dirty because it doesn't matter for making a "was COWed" decision anymore, and whoever modifies the page has to set the page dirty either way. Note 2: Kernels before extended uffd-wp support and before PageAnonExclusive (< 5.19) can simply revert the problematic commit instead and be safe regarding UFFDIO_CONTINUE. A backport to v5.19 requires minor adjustments due to lack of vma_soft_dirty_enabled(). | |||||
| CVE-2022-49968 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 8.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154/adf7242: defer destroy_workqueue call There is a possible race condition (use-after-free) like below (FREE) | (USE) adf7242_remove | adf7242_channel cancel_delayed_work_sync | destroy_workqueue (1) | adf7242_cmd_rx | mod_delayed_work (2) | The root cause for this race is that the upper layer (ieee802154) is unaware of this detaching event and the function adf7242_channel can be called without any checks. To fix this, we can add a flag write at the beginning of adf7242_remove and add flag check in adf7242_channel. Or we can just defer the destructive operation like other commit 3e0588c291d6 ("hamradio: defer ax25 kfree after unregister_netdev") which let the ieee802154_unregister_hw() to handle the synchronization. This patch takes the second option. runs") | |||||