Total
2978 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-71274 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: rpmsg: core: fix race in driver_override_show() and use core helper The driver_override_show function reads the driver_override string without holding the device_lock. However, the store function modifies and frees the string while holding the device_lock. This creates a race condition where the string can be freed by the store function while being read by the show function, leading to a use-after-free. To fix this, replace the rpmsg_string_attr macro with explicit show and store functions. The new driver_override_store uses the standard driver_set_override helper. Since the introduction of driver_set_override, the comments in include/linux/rpmsg.h have stated that this helper must be used to set or clear driver_override, but the implementation was not updated until now. Because driver_set_override modifies and frees the string while holding the device_lock, the new driver_override_show now correctly holds the device_lock during the read operation to prevent the race. Additionally, since rpmsg_string_attr has only ever been used for driver_override, removing the macro simplifies the code. | |||||
| CVE-2025-71235 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Delay module unload while fabric scan in progress System crash seen during load/unload test in a loop. [105954.384919] RBP: ffff914589838dc0 R08: 0000000000000000 R09: 0000000000000086 [105954.384920] R10: 000000000000000f R11: ffffa31240904be5 R12: ffff914605f868e0 [105954.384921] R13: ffff914605f86910 R14: 0000000000008010 R15: 00000000ddb7c000 [105954.384923] FS: 0000000000000000(0000) GS:ffff9163fec40000(0000) knlGS:0000000000000000 [105954.384925] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [105954.384926] CR2: 000055d31ce1d6a0 CR3: 0000000119f5e001 CR4: 0000000000770ee0 [105954.384928] PKRU: 55555554 [105954.384929] Call Trace: [105954.384931] <IRQ> [105954.384934] qla24xx_sp_unmap+0x1f3/0x2a0 [qla2xxx] [105954.384962] ? qla_async_scan_sp_done+0x114/0x1f0 [qla2xxx] [105954.384980] ? qla24xx_els_ct_entry+0x4de/0x760 [qla2xxx] [105954.384999] ? __wake_up_common+0x80/0x190 [105954.385004] ? qla24xx_process_response_queue+0xc2/0xaa0 [qla2xxx] [105954.385023] ? qla24xx_msix_rsp_q+0x44/0xb0 [qla2xxx] [105954.385040] ? __handle_irq_event_percpu+0x3d/0x190 [105954.385044] ? handle_irq_event+0x58/0xb0 [105954.385046] ? handle_edge_irq+0x93/0x240 [105954.385050] ? __common_interrupt+0x41/0xa0 [105954.385055] ? common_interrupt+0x3e/0xa0 [105954.385060] ? asm_common_interrupt+0x22/0x40 The root cause of this was that there was a free (dma_free_attrs) in the interrupt context. There was a device discovery/fabric scan in progress. A module unload was issued which set the UNLOADING flag. As part of the discovery, after receiving an interrupt a work queue was scheduled (which involved a work to be queued). Since the UNLOADING flag is set, the work item was not allocated and the mapped memory had to be freed. The free occurred in interrupt context leading to system crash. Delay the driver unload until the fabric scan is complete to avoid the crash. | |||||
| CVE-2025-71194 | 2026-10-19 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock in wait_current_trans() due to ignored transaction type When wait_current_trans() is called during start_transaction(), it currently waits for a blocked transaction without considering whether the given transaction type actually needs to wait for that particular transaction state. The btrfs_blocked_trans_types[] array already defines which transaction types should wait for which transaction states, but this check was missing in wait_current_trans(). This can lead to a deadlock scenario involving two transactions and pending ordered extents: 1. Transaction A is in TRANS_STATE_COMMIT_DOING state 2. A worker processing an ordered extent calls start_transaction() with TRANS_JOIN 3. join_transaction() returns -EBUSY because Transaction A is in TRANS_STATE_COMMIT_DOING 4. Transaction A moves to TRANS_STATE_UNBLOCKED and completes 5. A new Transaction B is created (TRANS_STATE_RUNNING) 6. The ordered extent from step 2 is added to Transaction B's pending ordered extents 7. Transaction B immediately starts commit by another task and enters TRANS_STATE_COMMIT_START 8. The worker finally reaches wait_current_trans(), sees Transaction B in TRANS_STATE_COMMIT_START (a blocked state), and waits unconditionally 9. However, TRANS_JOIN should NOT wait for TRANS_STATE_COMMIT_START according to btrfs_blocked_trans_types[] 10. Transaction B is waiting for pending ordered extents to complete 11. Deadlock: Transaction B waits for ordered extent, ordered extent waits for Transaction B This can be illustrated by the following call stacks: CPU0 CPU1 btrfs_finish_ordered_io() start_transaction(TRANS_JOIN) join_transaction() # -EBUSY (Transaction A is # TRANS_STATE_COMMIT_DOING) # Transaction A completes # Transaction B created # ordered extent added to # Transaction B's pending list btrfs_commit_transaction() # Transaction B enters # TRANS_STATE_COMMIT_START # waiting for pending ordered # extents wait_current_trans() # waits for Transaction B # (should not wait!) Task bstore_kv_sync in btrfs_commit_transaction waiting for ordered extents: __schedule+0x2e7/0x8a0 schedule+0x64/0xe0 btrfs_commit_transaction+0xbf7/0xda0 [btrfs] btrfs_sync_file+0x342/0x4d0 [btrfs] __x64_sys_fdatasync+0x4b/0x80 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Task kworker in wait_current_trans waiting for transaction commit: Workqueue: btrfs-syno_nocow btrfs_work_helper [btrfs] __schedule+0x2e7/0x8a0 schedule+0x64/0xe0 wait_current_trans+0xb0/0x110 [btrfs] start_transaction+0x346/0x5b0 [btrfs] btrfs_finish_ordered_io.isra.0+0x49b/0x9c0 [btrfs] btrfs_work_helper+0xe8/0x350 [btrfs] process_one_work+0x1d3/0x3c0 worker_thread+0x4d/0x3e0 kthread+0x12d/0x150 ret_from_fork+0x1f/0x30 Fix this by passing the transaction type to wait_current_trans() and checking btrfs_blocked_trans_types[cur_trans->state] against the given type before deciding to wait. This ensures that transaction types which are allowed to join during certain blocked states will not unnecessarily wait and cause deadlocks. | |||||
| CVE-2025-71183 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 9.1 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: always detect conflicting inodes when logging inode refs After rename exchanging (either with the rename exchange operation or regular renames in multiple non-atomic steps) two inodes and at least one of them is a directory, we can end up with a log tree that contains only of the inodes and after a power failure that can result in an attempt to delete the other inode when it should not because it was not deleted before the power failure. In some case that delete attempt fails when the target inode is a directory that contains a subvolume inside it, since the log replay code is not prepared to deal with directory entries that point to root items (only inode items). 1) We have directories "dir1" (inode A) and "dir2" (inode B) under the same parent directory; 2) We have a file (inode C) under directory "dir1" (inode A); 3) We have a subvolume inside directory "dir2" (inode B); 4) All these inodes were persisted in a past transaction and we are currently at transaction N; 5) We rename the file (inode C), so at btrfs_log_new_name() we update inode C's last_unlink_trans to N; 6) We get a rename exchange for "dir1" (inode A) and "dir2" (inode B), so after the exchange "dir1" is inode B and "dir2" is inode A. During the rename exchange we call btrfs_log_new_name() for inodes A and B, but because they are directories, we don't update their last_unlink_trans to N; 7) An fsync against the file (inode C) is done, and because its inode has a last_unlink_trans with a value of N we log its parent directory (inode A) (through btrfs_log_all_parents(), called from btrfs_log_inode_parent()). 8) So we end up with inode B not logged, which now has the old name of inode A. At copy_inode_items_to_log(), when logging inode A, we did not check if we had any conflicting inode to log because inode A has a generation lower than the current transaction (created in a past transaction); 9) After a power failure, when replaying the log tree, since we find that inode A has a new name that conflicts with the name of inode B in the fs tree, we attempt to delete inode B... this is wrong since that directory was never deleted before the power failure, and because there is a subvolume inside that directory, attempting to delete it will fail since replay_dir_deletes() and btrfs_unlink_inode() are not prepared to deal with dir items that point to roots instead of inodes. When that happens the mount fails and we get a stack trace like the following: [87.2314] BTRFS info (device dm-0): start tree-log replay [87.2318] BTRFS critical (device dm-0): failed to delete reference to subvol, root 5 inode 256 parent 259 [87.2332] ------------[ cut here ]------------ [87.2338] BTRFS: Transaction aborted (error -2) [87.2346] WARNING: CPU: 1 PID: 638968 at fs/btrfs/inode.c:4345 __btrfs_unlink_inode+0x416/0x440 [btrfs] [87.2368] Modules linked in: btrfs loop dm_thin_pool (...) [87.2470] CPU: 1 UID: 0 PID: 638968 Comm: mount Tainted: G W 6.18.0-rc7-btrfs-next-218+ #2 PREEMPT(full) [87.2489] Tainted: [W]=WARN [87.2494] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [87.2514] RIP: 0010:__btrfs_unlink_inode+0x416/0x440 [btrfs] [87.2538] Code: c0 89 04 24 (...) [87.2568] RSP: 0018:ffffc0e741f4b9b8 EFLAGS: 00010286 [87.2574] RAX: 0000000000000000 RBX: ffff9d3ec8a6cf60 RCX: 0000000000000000 [87.2582] RDX: 0000000000000002 RSI: ffffffff84ab45a1 RDI: 00000000ffffffff [87.2591] RBP: ffff9d3ec8a6ef20 R08: 0000000000000000 R09: ffffc0e741f4b840 [87.2599] R10: ffff9d45dc1fffa8 R11: 0000000000000003 R12: ffff9d3ee26d77e0 [87.2608] R13: ffffc0e741f4ba98 R14: ffff9d4458040800 R15: ffff9d44b6b7ca10 [87.2618] FS: 00007f7b9603a840(0000) GS:ffff9d4658982000(0000) knlGS:0000000000000000 [87. ---truncated--- | |||||
| CVE-2025-71182 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: can: j1939: make j1939_session_activate() fail if device is no longer registered syzbot is still reporting unregister_netdevice: waiting for vcan0 to become free. Usage count = 2 even after commit 93a27b5891b8 ("can: j1939: add missing calls in NETDEV_UNREGISTER notification handler") was added. A debug printk() patch found that j1939_session_activate() can succeed even after j1939_cancel_active_session() from j1939_netdev_notify(NETDEV_UNREGISTER) has completed. Since j1939_cancel_active_session() is processed with the session list lock held, checking ndev->reg_state in j1939_session_activate() with the session list lock held can reliably close the race window. | |||||
| CVE-2025-71126 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: avoid deadlock on fallback while reinjecting Jakub reported an MPTCP deadlock at fallback time: WARNING: possible recursive locking detected 6.18.0-rc7-virtme #1 Not tainted -------------------------------------------- mptcp_connect/20858 is trying to acquire lock: ff1100001da18b60 (&msk->fallback_lock){+.-.}-{3:3}, at: __mptcp_try_fallback+0xd8/0x280 but task is already holding lock: ff1100001da18b60 (&msk->fallback_lock){+.-.}-{3:3}, at: __mptcp_retrans+0x352/0xaa0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&msk->fallback_lock); lock(&msk->fallback_lock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by mptcp_connect/20858: #0: ff1100001da18290 (sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg+0x114/0x1bc0 #1: ff1100001db40fd0 (k-sk_lock-AF_INET#2){+.+.}-{0:0}, at: __mptcp_retrans+0x2cb/0xaa0 #2: ff1100001da18b60 (&msk->fallback_lock){+.-.}-{3:3}, at: __mptcp_retrans+0x352/0xaa0 stack backtrace: CPU: 0 UID: 0 PID: 20858 Comm: mptcp_connect Not tainted 6.18.0-rc7-virtme #1 PREEMPT(full) Hardware name: Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl+0x6f/0xa0 print_deadlock_bug.cold+0xc0/0xcd validate_chain+0x2ff/0x5f0 __lock_acquire+0x34c/0x740 lock_acquire.part.0+0xbc/0x260 _raw_spin_lock_bh+0x38/0x50 __mptcp_try_fallback+0xd8/0x280 mptcp_sendmsg_frag+0x16c2/0x3050 __mptcp_retrans+0x421/0xaa0 mptcp_release_cb+0x5aa/0xa70 release_sock+0xab/0x1d0 mptcp_sendmsg+0xd5b/0x1bc0 sock_write_iter+0x281/0x4d0 new_sync_write+0x3c5/0x6f0 vfs_write+0x65e/0xbb0 ksys_write+0x17e/0x200 do_syscall_64+0xbb/0xfd0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fa5627cbc5e Code: 4d 89 d8 e8 14 bd 00 00 4c 8b 5d f8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 11 c9 c3 0f 1f 80 00 00 00 00 48 8b 45 10 0f 05 <c9> c3 83 e2 39 83 fa 08 75 e7 e8 13 ff ff ff 0f 1f 00 f3 0f 1e fa RSP: 002b:00007fff1fe14700 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fa5627cbc5e RDX: 0000000000001f9c RSI: 00007fff1fe16984 RDI: 0000000000000005 RBP: 00007fff1fe14710 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00007fff1fe16920 R13: 0000000000002000 R14: 0000000000001f9c R15: 0000000000001f9c The packet scheduler could attempt a reinjection after receiving an MP_FAIL and before the infinite map has been transmitted, causing a deadlock since MPTCP needs to do the reinjection atomically from WRT fallback. Address the issue explicitly avoiding the reinjection in the critical scenario. Note that this is the only fallback critical section that could potentially send packets and hit the double-lock. | |||||
| CVE-2025-71111 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83791d) Convert macros to functions to avoid TOCTOU The macro FAN_FROM_REG evaluates its arguments multiple times. When used in lockless contexts involving shared driver data, this leads to Time-of-Check to Time-of-Use (TOCTOU) race conditions, potentially causing divide-by-zero errors. Convert the macro to a static function. This guarantees that arguments are evaluated only once (pass-by-value), preventing the race conditions. Additionally, in store_fan_div, move the calculation of the minimum limit inside the update lock. This ensures that the read-modify-write sequence operates on consistent data. Adhere to the principle of minimal changes by only converting macros that evaluate arguments multiple times and are used in lockless contexts. | |||||
| CVE-2025-71078 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/64s/slb: Fix SLB multihit issue during SLB preload On systems using the hash MMU, there is a software SLB preload cache that mirrors the entries loaded into the hardware SLB buffer. This preload cache is subject to periodic eviction — typically after every 256 context switches — to remove old entry. To optimize performance, the kernel skips switch_mmu_context() in switch_mm_irqs_off() when the prev and next mm_struct are the same. However, on hash MMU systems, this can lead to inconsistencies between the hardware SLB and the software preload cache. If an SLB entry for a process is evicted from the software cache on one CPU, and the same process later runs on another CPU without executing switch_mmu_context(), the hardware SLB may retain stale entries. If the kernel then attempts to reload that entry, it can trigger an SLB multi-hit error. The following timeline shows how stale SLB entries are created and can cause a multi-hit error when a process moves between CPUs without a MMU context switch. CPU 0 CPU 1 ----- ----- Process P exec swapper/1 load_elf_binary begin_new_exc activate_mm switch_mm_irqs_off switch_mmu_context switch_slb /* * This invalidates all * the entries in the HW * and setup the new HW * SLB entries as per the * preload cache. */ context_switch sched_migrate_task migrates process P to cpu-1 Process swapper/0 context switch (to process P) (uses mm_struct of Process P) switch_mm_irqs_off() switch_slb load_slb++ /* * load_slb becomes 0 here * and we evict an entry from * the preload cache with * preload_age(). We still * keep HW SLB and preload * cache in sync, that is * because all HW SLB entries * anyways gets evicted in * switch_slb during SLBIA. * We then only add those * entries back in HW SLB, * which are currently * present in preload_cache * (after eviction). */ load_elf_binary continues... setup_new_exec() slb_setup_new_exec() sched_switch event sched_migrate_task migrates process P to cpu-0 context_switch from swapper/0 to Process P switch_mm_irqs_off() /* * Since both prev and next mm struct are same we don't call * switch_mmu_context(). This will cause the HW SLB and SW preload * cache to go out of sync in preload_new_slb_context. Because there * was an SLB entry which was evicted from both HW and preload cache * on cpu-1. Now later in preload_new_slb_context(), when we will try * to add the same preload entry again, we will add this to the SW * preload cache and then will add it to the HW SLB. Since on cpu-0 * this entry was never invalidated, hence adding this entry to the HW * SLB will cause a SLB multi-hit error. */ load_elf_binary cont ---truncated--- | |||||
| CVE-2026-100805 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-10-19 | N/A | 7.5 HIGH |
| Race condition, use-after-free in the Audio/Video component. This vulnerability was fixed in Thunderbird 157 and Firefox 157. | |||||
| CVE-2025-58145 | 1 Xen | 1 Xen | 2026-10-19 | N/A | 7.5 HIGH |
| [This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] There are two issues related to the mapping of pages belonging to other domains: For one, an assertion is wrong there, where the case actually needs handling. A NULL pointer de-reference could result on a release build. This is CVE-2025-58144. And then the P2M lock isn't held until a page reference was actually obtained (or the attempt to do so has failed). Otherwise the page can not only change type, but even ownership in between, thus allowing domain boundaries to be violated. This is CVE-2025-58145. | |||||
| CVE-2025-10778 | 2026-10-19 | 2.1 LOW | 3.1 LOW | ||
| A vulnerability has been found in Smartstore up to 6.2.0. The affected element is an unknown function of the file /checkout/confirm/ of the component Gift Voucher Handler. The manipulation leads to race condition. The attack may be initiated remotely. The attack's complexity is rated as high. The exploitability is described as difficult. The vendor was contacted early about this disclosure but did not respond in any way. | |||||
| CVE-2026-84014 | 1 Microsoft | 14 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 11 more | 2026-10-19 | N/A | 7.0 HIGH |
| Heap-based buffer overflow in Windows Device Association Service allows an authorized attacker to elevate privileges locally. | |||||
| CVE-2025-64168 | 2026-10-19 | N/A | 7.1 HIGH | ||
| Agno is a multi-agent framework, runtime and control plane. From 2.0.0 to before 2.2.2, under high concurrency, when session_state is passed to Agent or Team during run or arun calls, a race condition can occur, causing a session_state to be assigned and persisted to the incorrect session. This may result in user data from one session being exposed to another user. This has been patched in version 2.2.2. | |||||
| CVE-2026-98163 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: cgroup: Avoid iteration of dying tasks with zero refcount The commit 260fbcb92bbea ("cgroup: Move dying_tasks cleanup from cgroup_task_release() to cgroup_task_free()") extended the lifetime of tasks on the dying_tasks list. The iterators have provision to go through dying_tasks because of dying threadgroup leaders or explicit CSS_TASK_ITER_WITH_DEAD, however, it was expected that such tasks can obtain a new reference (that is possible before cgroup_task_release()/put_task_struct_rcu_user()). The tasks after cgroup_task_release() and before cgroup_task_free() are subject to race when they may or may not have ->usage count > 0. The race window is between css_task_iter_next() invocations when css_set_lock is released and we may arrive at a new ->task_pos. The iterator should not attempt to resurrect tasks whose ->usage count dropped to zero. (When that happens, __put_task_struct_rcu_cb() is already imminent and the returned task_struct would could be used after free.) As for the fix, we cannot simply check the signal->live count of a task on the dying list because that won't distinguish regular zombies waiting to be reaped from RCU remnant tasks that are going to be free'd. Therefore add an extra check to rule out ->usage==0 tasks from any iteration. The repeat: loop in css_task_iter_advance() doesn't consider ->usage count, so add a new loop to css_task_iter_next() to skip de-used tasks on the dying_list. Rough illustration of the possible race R (reader of cgroup.procs) T (thread) L (group leader) --------------------------------- -------------------------------- -------------------------------- L exits, signal->live > 0 cgroup_task_dead(L) css_set_skip_task_iters() // skips only cset->tasks list_add_tail(&L->cg_list, &cset->dying_tasks) css_task_iter_next() take css_set_lock css_task_iter_advance() leader && signal->live != 0 => it->task_pos = &L->cg_list release css_set_lock T exits --signal->live == 0 cgroup_task_dead(T) // css_set_lock release_task(T) cgroup_task_release(T) release_task(L) // zap_leader cgroup_task_release(L) put_task_struct_rcu_user(L) ...RCU... put_task_struct(L) L->usage = 0 /* L still on dying_tasks */ ...RCU... __put_task_struct(L) css_task_iter_next() // another iteration take css_set_lock it->task_pos = &L->cg_list get_task_struct(L) => addition on 0 drop css_set_lock cgroup_task_free(L) css_set_skip_task_iters() // dying skip comes too late free_task(L) cgroup_procs_show() task_pid_vnr(L) | |||||
| CVE-2026-98115 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: safely drain sessions during logoff SMB3 multichannel allows requests for one session to run on multiple connections. Wait for all channels bound to a session before freeing shared session objects. A deferred byte-range lock remains counted as a running request and only wakes when its file closes. Wake blocked locks during the drain without unpublishing or modifying their file objects. Synchronous CANCEL requests must invoke their cancellation callback to wake pending operations, while CHANGE_NOTIFY completion remains specific to the asynchronous path. Serialize session teardown with channel registration and previous-session cleanup, and use atomic work-state transitions so LOGOFF, CANCEL, and connection teardown invoke cancellation callbacks only once. | |||||
| CVE-2026-98109 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix race condition during device registration In hci_register_dev(), the power_on work item is queued to hdev->req_workqueue before initializing hdev->adv_monitors_idr and registering the MSFT extension via msft_register(). For devices marked with quirks such as HCI_QUIRK_RAW_DEVICE, the HCI_UNCONFIGURED flag is set on the device. When the power_on work item runs concurrently on another CPU, hci_power_on() detects that the device is unconfigured and immediately invokes hci_dev_do_close(), which calls msft_do_close(). Concurrently, msft_register() allocates the msft structure and exposes it to hdev->msft_data prior to calling mutex_init(&msft->filter_lock). If msft_do_close() executes while hdev->msft_data is already assigned but the mutex has not yet been initialized, mutex_lock(&msft->filter_lock) operates on an uninitialized mutex, triggering a DEBUG_LOCKS warning: DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: kernel/locking/mutex.c:625 at __mutex_lock_common kernel/locking/mutex.c:625 [inline] WARNING: kernel/locking/mutex.c:625 at __mutex_lock+0x12d8/0x1550 kernel/locking/mutex.c:821 ... Call Trace: <TASK> msft_do_close+0x308/0x7b0 net/bluetooth/msft.c:693 hci_dev_close_sync+0x86b/0x10a0 net/bluetooth/hci_sync.c:5522 hci_dev_do_close net/bluetooth/hci_core.c:499 [inline] hci_power_on+0x32c/0x750 net/bluetooth/hci_core.c:937 process_one_work kernel/workqueue.c:3322 [inline] process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405 worker_thread+0x92d/0xe10 kernel/workqueue.c:3486 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Fix this by moving the queue_work() call in hci_register_dev() to after idr_init(&hdev->adv_monitors_idr) and msft_register(hdev) so that device structures and extensions are fully initialized before asynchronous tasks can access them. Additionally, assign hdev->msft_data in msft_register() only after mutex_init(&msft->filter_lock) has completed. | |||||
| CVE-2026-98050 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_ptp: Fix napi_gro_receive() call from GC workqueue context Currently mlxsw_sp1_ptp_ht_gc_collect() is run from the PTP garbage-collection workqueue, rather than the NAPI poll context. For any unmatched PTP entries carrying an SKB, it calls mlxsw_sp1_ptp_unmatched_finish() -> mlxsw_sp1_ptp_packet_finish(). For ingress packets, this calls mlxsw_sp_rx_listener_no_mark_func(). The end of that function is the following: skb->protocol = eth_type_trans(skb, skb->dev); napi_gro_receive(mlxsw_skb_cb(skb)->rx_md_info.napi, skb); The napi pointer is one that was placed in the SKB control block when the trapped packet was received in the NAPI context. Later, when the GC reaps the unmatched entry (up to MLXSW_SP1_PTP_HT_GC_TIMEOUT later), the call to napi_gro_receive() mutates the NAPI instance's GRO list, which is unsafe if the poll is running concurrently on another CPU. In mlxsw_sp1_ptp_ht_gc_collect(), local_bh_disable() is called to prevent softirq processing, but this only applies to the local CPU. Additionally, its comment is stale. It states that mlxsw_sp1_ptp_unmatched_finish() invokes netif_receive_skb(). This has not been accurate since the referenced commit; this patch makes that comment accurate again. mlxsw_pci_napi_devs_init() calls netif_threaded_enable() on the NAPI RX net_device without any conditions. The NAPI instance's poll, which may be running concurrent to the GC, is running as an independently-scheduled kthread which may be on a different CPU. The call to local_bh_disable() does not guard against this. If a tx-timestamp timeout produces an unmatched entry (which can be easily reproduced by running ptp4l and waiting for a port to reach the UNCALIBRATED/SLAVE state) while the owning NAPI thread is in the middle of a poll on another CPU, both sides mutate the GRO list concurrently, as shown below: [39.846] port 1 (swp1): MASTER to UNCALIBRATED on RS_SLAVE list_add corruption. next->prev should be prev (ffff8d620faf4138), but was ffff8d624150f700. (next=ffff8d620faf4138). kernel BUG at lib/list_debug.c:29! Oops: invalid opcode: 0000 [#1] SMP PTI CPU: 1 UID: 0 PID: 539 Comm: napi/mlxsw_rx-0 Not tainted 6.18.48 #1-NixOS PREEMPT(lazy) Hardware name: Mellanox Technologies Ltd. MSN2410/VMOD0001, BIOS 4.6.5 09/13/2018 RIP: 0010:__list_add_valid_or_report+0x79/0xb0 RSP: 0018:ffffcdf8c0f27c08 EFLAGS: 00010246 RAX: 0000000000000075 RBX: ffff8d624150fd00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8d6315d1e540 RBP: ffff8d620faf4070 R08: 0000000000000000 R09: 00000000ffffdfff R10: ffffffffa5c60fe0 R11: ffffcdf8c0f27ab8 R12: 0000000000000003 R13: 000000000000003d R14: 00000000000001bc R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8d636f63f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000562689a60c24 CR3: 000000015f224004 CR4: 00000000001726f0 Call Trace: <TASK> gro_receive_skb+0xee/0x230 mlxsw_sp1_ptp_got_packet+0x61/0x140 [mlxsw_spectrum] mlxsw_core_skb_receive+0xdf/0x1b0 [mlxsw_core] mlxsw_pci_napi_poll_cq_rx+0x780/0x9d0 [mlxsw_pci] __napi_poll+0x31/0x1e0 napi_threaded_poll_loop+0x16b/0x1c0 napi_threaded_poll+0x71/0xa0 kthread+0xfb/0x260 ret_from_fork+0x22d/0x260 ret_from_fork_asm+0x1a/0x30 </TASK> Kernel panic - not syncing: Fatal exception in interrupt The machinery that leads to this kernel panic has not been changed between 6.18.48 and mainline. This patch adds an ingress-delivery helper for the PTP packet_finish() path that calls netif_receive_skb() instead of napi_gro_receive(). netif_receive_skb(), unlike napi_gro_receive(), can be called from outside of the NAPI instance's poll context, which can occur at the call site for this path. RX stats accounting and the skb->dev assignment are still preserved; the only change is the delivery call itself. This removes GR ---truncated--- | |||||
| CVE-2025-23259 | 2026-10-18 | N/A | 6.5 MEDIUM | ||
| NVIDIA Mellanox DPDK contains a vulnerability in Poll Mode Driver (PMD), where an attacker on a VM in the system might be able to cause information disclosure and denial of service on the network interface. | |||||
| CVE-2025-54105 | 1 Microsoft | 3 Windows 11 24h2, Windows Server 2022 23h2, Windows Server 2025 | 2026-10-18 | N/A | 7.0 HIGH |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Microsoft Brokering File System allows an authorized attacker to elevate privileges locally. | |||||
| CVE-2025-62218 | 1 Microsoft | 7 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 4 more | 2026-10-18 | N/A | 7.0 HIGH |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Microsoft Wireless Provisioning System allows an authorized attacker to elevate privileges locally. | |||||