Total
965 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-6328 | 2026-06-17 | N/A | N/A | ||
| Improper input validation, Improper verification of cryptographic signature vulnerability in XQUIC Project XQUIC xquic on Linux (QUIC protocol implementation, packet processing module, STREAM frame handler modules) allows Protocol Manipulation.This issue affects XQUIC: through 1.8.3. | |||||
| CVE-2026-5466 | 1 Wolfssl | 1 Wolfssl | 2026-06-17 | N/A | 8.1 HIGH |
| wolfSSL's ECCSI signature verifier `wc_VerifyEccsiHash` decodes the `r` and `s` scalars from the signature blob via `mp_read_unsigned_bin` with no check that they lie in `[1, q-1]`. A crafted forged signature could verify against any message for any identity, using only publicly-known constants. | |||||
| CVE-2026-5050 | 2026-06-17 | N/A | 7.5 HIGH | ||
| The Payment Gateway for Redsys & WooCommerce Lite plugin for WordPress is vulnerable to Improper Verification of Cryptographic Signature in versions up to, and including, 7.0.0 due to successful_request() handlers calculating a local signature but not validating Ds_Signature from the request before accepting payment status across the Redsys, Bizum, and Google Pay gateway flows. This makes it possible for unauthenticated attackers to forge payment callback data and mark pending orders as paid when they know a valid order key and order amount, potentially allowing checkout completion and product or service fulfillment without a successful payment. | |||||
| CVE-2026-4541 | 2026-06-17 | 1.0 LOW | 2.5 LOW | ||
| A flaw has been found in janmojzis tinyssh up to 20250501. Impacted is an unknown function of the file tinyssh/crypto_sign_ed25519_tinyssh.c of the component Ed25519 Signature Handler. This manipulation causes improper verification of cryptographic signature. The attack is restricted to local execution. The attack's complexity is rated as high. The exploitability is considered difficult. The exploit has been published and may be used. Upgrading to version 20260301 is recommended to address this issue. Patch name: 9c87269607e0d7d20174df742accc49c042cff17. Upgrading the affected component is recommended. | |||||
| CVE-2026-4478 | 2026-06-17 | 7.6 HIGH | 8.1 HIGH | ||
| A vulnerability was identified in Yi Technology YI Home Camera 2 2.1.1_20171024151200. This impacts an unknown function of the file home/web/ipc of the component HTTP Firmware Update Handler. The manipulation leads to improper verification of cryptographic signature. The attack is possible to be carried out remotely. The complexity of an attack is rather high. The exploitability is said to be difficult. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. | |||||
| CVE-2026-4115 | 1 Putty | 1 Putty | 2026-06-17 | 2.6 LOW | 3.7 LOW |
| A vulnerability was detected in PuTTY 0.83. Affected is the function eddsa_verify of the file crypto/ecc-ssh.c of the component Ed25519 Signature Handler. The manipulation results in improper verification of cryptographic signature. The attack may be performed from remote. The attack requires a high level of complexity. The exploitability is told to be difficult. The exploit is now public and may be used. The real existence of this vulnerability is still doubted at the moment. The patch is identified as af996b5ec27ab79bae3882071b9d6acf16044549. It is advisable to implement a patch to correct this issue. The vendor was contacted early, responded in a very professional manner and quickly released a patch for the affected product. However, at the moment there is no proof that this flaw might have any real-world impact. | |||||
| CVE-2026-44714 | 2026-06-17 | N/A | 7.5 HIGH | ||
| The bitcoinj library is a Java implementation of the Bitcoin protocol. Prior to 0.17.1, ScriptExecution.correctlySpends() contains two fast-path verification bugs for standard P2PKH and native P2WPKH spends in core/src/main/java/org/bitcoinj/script/ScriptExecution.java. In both branches, bitcoinj verifies an attacker-controlled signature/public-key pair but fails to verify that the public key is the one committed to by the output being spent. As a result, any attacker keypair can satisfy bitcoinj's local verification for arbitrary P2PKH and P2WPKH outputs. This vulnerability is fixed in 0.17.1. | |||||
| CVE-2026-44497 | 1 Zfnd | 2 Zebra-script, Zebrad | 2026-06-17 | N/A | 9.1 CRITICAL |
| ZEBRA is a Zcash node written entirely in Rust. Prior to zebrad version 4.4.0 and prior to zebra-script version 6.0.0, the fix for CVE-2026-41583 introduced a separate issue due to insufficient error handling of the case where the sighash type is invalid, during sighash computation. Instead of returning an error, the normal flow would resume, and the input sighash buffer would be left untouched. In scenarios where a previous signature validation could leave a valid sighash in the buffer, an invalid hash-type could be incorrectly accepted, which would create a consensus split between Zebra and zcashd nodes. This issue has been patched in zebrad version 4.4.0 and zebra-script version 6.0.0. | |||||
| CVE-2026-42501 | 1 Golang | 1 Go | 2026-06-17 | N/A | 7.5 HIGH |
| A malicious module proxy can exploit a flaw in the go command's validation of module checksums to bypass checksum database validation. This vulnerability affects any user using an untrusted module proxy (GOMODPROXY) or checksum database (GOSUMDB). A malicious module proxy can serve altered versions of the Go toolchain. When selecting a different version of the Go toolchain than the currently installed toolchain (due to the GOTOOLCHAIN environment variable, or a go.work or go.mod with a toolchain line), the go command will download and execute a toolchain provided by the module proxy. A malicious module proxy can bypass checksum database validation for this downloaded toolchain. Since this vulnerability affects the security of toolchain downloads, setting GOTOOLCHAIN to a fixed version is not sufficient. You must upgrade your base Go toolchain. The go tool always validates the hash of a toolchain before executing it, so fixed versions will refuse to execute any cached, altered versions of the toolchain. The go tool trusts go.sum files to contain accurate hashes of the current module's dependencies. A malicious proxy exploiting this vulnerability to serve an altered module will have caused an incorrect hash to be recorded in the go.sum. Users who have configured a non-trusted GOPROXY can determine if they have been affected by running "rm go.sum ; go mod tidy ; go mod verify", which will revalidate all dependencies of the current module. The specific flaw in more detail: The go command consults the checksum database to validate downloaded modules, when a module is not listed in the go.sum file. It verifies that the module hash reported by the checksum database matches the hash of the downloaded module. If, however, the checksum database returns a successful response that contains no entry for the module, the go command incorrectly permitted validation to succeed. A module proxy may mirror or proxy the checksum database, in which case the go command will not connect to the checksum database directly. Checksums reported by the checksum database are cryptographically signed, so a malicious proxy cannot alter the reported checksum for a module. However, a proxy which returns an empty checksum response, or a checksum response for an unrelated module, could cause the go command to proceed as if a downloaded module has been validated. | |||||
| CVE-2026-41669 | 2026-06-17 | N/A | 8.2 HIGH | ||
| Admidio is an open-source user management solution. Prior to version 5.0.9, the Admidio SAML Identity Provider implementation discards the return value of its validateSignature() method at both call sites (handleSSORequest() line 418 and handleSLORequest() line 613). The method returns error strings on failure rather than throwing exceptions, but the developer believed it would throw (per comments on lines 416 and 611). This means the smc_require_auth_signed configuration option is completely ineffective — unsigned or invalidly-signed SAML AuthnRequests and LogoutRequests are processed identically to properly signed ones. This issue has been patched in version 5.0.9. | |||||
| CVE-2026-41301 | 1 Openclaw | 1 Openclaw | 2026-06-17 | N/A | 5.3 MEDIUM |
| OpenClaw versions 2026.3.22 before 2026.3.31 contain a signature verification bypass vulnerability in the Nostr DM ingress path that allows pairing challenges to be issued before event signature validation. An unauthenticated remote attacker can send forged direct messages to create pending pairing entries and trigger pairing-reply attempts, consuming shared pairing capacity and triggering bounded relay and logging work on the Nostr channel. | |||||
| CVE-2026-41005 | 2026-06-17 | N/A | 9.0 CRITICAL | ||
| Cloud Foundry UAA incorrectly treated XML encryption to the Service Provider (confidentiality) as a substitute for XML signatures from the Identity Provider (authenticity) in two SAML flows: the OAuth 2.0 SAML2 bearer grant (token endpoint) and browser SSO (ACS) when wantAssertionSigned is set to false. Assertions or responses that were unsigned but contained encrypted content could still be accepted. Encryption uses the SP's public key from published metadata, therefore, any party, not only a trusted IdP, can produce ciphertext UAA can decrypt; successful decryption therefore does not prove the IdP issued the message. Affected versions: Cloud Foundry UAA (uaa_release) 2.0.0 through 78.13.0. Cloud Foundry CF Deployment all versions through 56.1.0. | |||||
| CVE-2026-3706 | 2026-06-17 | 2.6 LOW | 3.7 LOW | ||
| A vulnerability was determined in mkj Dropbear up to 2025.89. Impacted is the function unpackneg of the file src/curve25519.c of the component S Range Check. This manipulation causes improper verification of cryptographic signature. The attack can be initiated remotely. The attack is considered to have high complexity. The exploitability is considered difficult. The actual existence of this vulnerability is currently in question. Patch name: fdec3c90a15447bd538641d85e5a3e3ac981011d. To fix this issue, it is recommended to deploy a patch. The project maintainer explains: "Signature Malleability is not exploitable in SSH protocol. (...) [A] PoC doesn't exist for SSH implementation, but rather it's against the internal API." | |||||
| CVE-2026-3562 | 1 Philips | 2 Hue Bridge V2, Hue Bridge V2 Firmware | 2026-06-17 | N/A | 8.8 HIGH |
| Philips Hue Bridge hk_hap Ed25519 Signature Verification Authentication Bypass Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Philips Hue Bridge. Authentication is not required to exploit this vulnerability. The specific flaw exists within the ed25519_sign_open function. The issue results from improper verification of a cryptographic signature. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-28480. | |||||
| CVE-2026-38651 | 1 Netmaker | 1 Netmaker | 2026-06-17 | N/A | 8.2 HIGH |
| Authentication Bypass vulnerability exists in Netmaker versions prior to 1.5.0. The VerifyHostToken function in logic/jwts.go fails to validate the JWT signature when verifying host tokens. An attacker can forge a JWT signed with any arbitrary key and use it to impersonate any host in the network, gaining access to sensitive information | |||||
| CVE-2026-34872 | 1 Arm | 2 Mbed Tls, Tf-psa-crypto | 2026-06-17 | N/A | 9.1 CRITICAL |
| An issue was discovered in Mbed TLS 3.5.x and 3.6.x through 3.6.5 and TF-PSA-Crypto 1.0. There is a lack of contributory behavior in FFDH due to improper input validation. Using finite-field Diffie-Hellman, the other party can force the shared secret into a small set of values (lack of contributory behavior). This is a problem for protocols that depend on contributory behavior (which is not the case for TLS). The attack can be carried by the peer, or depending on the protocol by an active network attacker (person in the middle). | |||||
| CVE-2026-33026 | 1 Nginxui | 1 Nginx Ui | 2026-06-17 | N/A | 9.1 CRITICAL |
| Nginx UI is a web user interface for the Nginx web server. Prior to version 2.3.4, the nginx-ui backup restore mechanism allows attackers to tamper with encrypted backup archives and inject malicious configuration during restoration. This issue has been patched in version 2.3.4. | |||||
| CVE-2026-32974 | 1 Openclaw | 1 Openclaw | 2026-06-17 | N/A | 8.6 HIGH |
| OpenClaw before 2026.3.12 contains an authentication bypass vulnerability in Feishu webhook mode when only verificationToken is configured without encryptKey, allowing acceptance of forged events. Unauthenticated network attackers can inject forged Feishu events and trigger downstream tool execution by reaching the webhook endpoint. | |||||
| CVE-2026-32883 | 1 Botan Project | 1 Botan | 2026-06-17 | N/A | 5.9 MEDIUM |
| Botan is a C++ cryptography library. From version 3.0.0 to before version 3.11.0, during X509 path validation, OCSP responses were checked for an appropriate status code, but critically omitted verifying the signature of the OCSP response itself. This issue has been patched in version 3.11.0. | |||||
| CVE-2026-32614 | 2026-06-17 | N/A | 7.5 HIGH | ||
| Go ShangMi (Commercial Cryptography) Library (GMSM) is a cryptographic library that covers the Chinese commercial cryptographic public algorithms SM2/SM3/SM4/SM9/ZUC. Prior to 0.41.1, the current SM9 decryption implementation contains an infinity-point ciphertext forgery vulnerability. The root cause is that, during decryption, the elliptic-curve point C1 in the ciphertext is only deserialized and checked to be on the curve, but the implementation does not explicitly reject the point at infinity. In the current implementation, an attacker can construct C1 as the point at infinity, causing the bilinear pairing result to degenerate into the identity element in the GT group. As a result, a critical part of the key derivation input becomes a predictable constant. An attacker who only knows the target user's UID can derive the decryption key material and then forge a ciphertext that passes the integrity check. This vulnerability is fixed in 0.41.1. | |||||