Total
769 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-69105 | 1 Jfrog | 1 Artifactory | 2026-09-11 | N/A | 8.1 HIGH |
| An unauthenticated attacker may cause untrusted package content to be cached under specific conditions, potentially affecting artifact integrity and availability. | |||||
| CVE-2026-76245 | 2026-09-11 | N/A | N/A | ||
| stigmem (pip package stigmem-node) version 0.9.0a1 contains a timestamp-handling mismatch in federation peer-token validation that can cause valid peer tokens to be incorrectly treated as expired. This affects the availability and reliability of authenticated federation flows on nodes using federation peer authentication paths. The issue is fixed in 0.9.0a2, which uses the canonical millisecond-based validation path. | |||||
| CVE-2026-82215 | 2026-09-11 | N/A | 5.9 MEDIUM | ||
| The Payment Gateway PayPay for WooCommerce WordPress plugin from 0.5 to 0.9.3 does not verify the authenticity of the payment notifications it receives before acting on them, allowing unauthenticated attackers who know the store's merchant identifier to mark arbitrary orders as paid, or to cancel or fail them. | |||||
| CVE-2026-86809 | 2026-09-11 | N/A | 5.3 MEDIUM | ||
| The Persian Elementor WordPress plugin from 2.7.10 before 2.8.2 does not verify that the payment authority returned to its ZarinPal payment callback belongs to the transaction being completed, allowing unauthenticated attackers to complete a pending order using a valid payment authority obtained from a different transaction. | |||||
| CVE-2026-33243 | 1 Pengutronix | 1 Barebox | 2026-09-11 | N/A | 8.2 HIGH |
| barebox is a bootloader. In barebox from version 2016.03.0 to before version 2026.03.1 (and the corresponding backport to 2025.09.3), an attacker could exploit a FIT signature verification vulnerability to trick the bootloader into booting different images than those that were verified as part of a signed configuration. mkimage(1) sets the hashed-nodes property of the FIT signature node to list which nodes of the FIT were hashed as part of the signing process as these will need to be verified later on by the bootloader. However, hashed-nodes itself is not part of the hash and could therefore be modified to allow booting different images than those that have been verified. This issue has been patched in barebox versions 2026.03.1 and backported to 2025.09.3. | |||||
| CVE-2026-80172 | 1 Dell | 1 Secure Connect Gateway | 2026-09-11 | N/A | 9.8 CRITICAL |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Insufficient Verification of Data Authenticity vulnerability. An unauthenticated attacker with remote access could exploit this, leading to unauthorized access. This vulnerability is considered critical as an unauthenticated attacker can repeatedly reuse a captured request to generate ADMIN access and refresh tokens. Since there is no nonce validation or time limit on requests, the attack can be performed indefinitely. Dell recommends customers to upgrade at the earliest opportunity | |||||
| CVE-2026-48063 | 2026-09-10 | N/A | N/A | ||
| Baileys is a cocket-based TS/JavaScript API for WhatsApp Web. In versions prior to both 6.7.22 and 7.0.0-rc12, any Baileys session can be sent a malicious payload via the placeholderResendMessage and trigger a fake messages.upsert event with a fake message key and payload. This allows anyone to spoof messages. The same exploit also allows an attacker to corrupt the app state sync system by sending fake key shares, and also allows for history sync spoofing which also serves the same problem, injecting fake previous context or "on-demand" sync. This issue has been fixed in versions 6.7.22 and 7.0.0-rc12. | |||||
| CVE-2026-82465 | 2026-09-10 | N/A | 5.3 MEDIUM | ||
| pac4j-saml before 6.5.6 does not require signature validation of SAML LogoutRequest messages in SAML2LogoutValidator.validateLogoutRequest(). When an IdP sends no SessionIndex, a session can be destroyed based solely on the NameID, allowing an unauthenticated attacker to submit an unsigned LogoutRequest with a guessed identifier (e.g., an email address used as NameID) to terminate a victim's SAML session. | |||||
| CVE-2026-82462 | 2026-09-10 | N/A | 6.5 MEDIUM | ||
| pac4j-oidc before 6.5.6 accepts OIDC callbacks carrying only an access token without authorization code or ID token validation. Attackers can substitute access tokens minted for other clients to create authenticated sessions without proper issuer, audience, nonce, or subject verification. | |||||
| CVE-2026-32597 | 1 Pyjwt Project | 1 Pyjwt | 2026-09-10 | N/A | 7.5 HIGH |
| PyJWT is a JSON Web Token implementation in Python. Prior to 2.12.0, PyJWT does not validate the crit (Critical) Header Parameter defined in RFC 7515 §4.1.11. When a JWS token contains a crit array listing extensions that PyJWT does not understand, the library accepts the token instead of rejecting it. This violates the MUST requirement in the RFC. This vulnerability is fixed in 2.12.0. | |||||
| CVE-2026-26007 | 1 Cryptography.io | 1 Cryptography | 2026-09-10 | N/A | 6.5 MEDIUM |
| cryptography is a package designed to expose cryptographic primitives and recipes to Python developers. Prior to 46.0.5, the public_key_from_numbers (or EllipticCurvePublicNumbers.public_key()), EllipticCurvePublicNumbers.public_key(), load_der_public_key() and load_pem_public_key() functions do not verify that the point belongs to the expected prime-order subgroup of the curve. This missing validation allows an attacker to provide a public key point P from a small-order subgroup. This can lead to security issues in various situations, such as the most commonly used signature verification (ECDSA) and shared key negotiation (ECDH). When the victim computes the shared secret as S = [victim_private_key]P via ECDH, this leaks information about victim_private_key mod (small_subgroup_order). For curves with cofactor > 1, this reveals the least significant bits of the private key. When these weak public keys are used in ECDSA , it's easy to forge signatures on the small subgroup. Only SECT curves are impacted by this. This vulnerability is fixed in 46.0.5. | |||||
| CVE-2026-68554 | 2026-09-09 | N/A | N/A | ||
| Coturn is a free open source implementation of TURN and STUN Server. Prior to 4.15.0, an on-path attacker can append attributes after MESSAGE-INTEGRITY to an authenticated STUN request on plain UDP or TCP, adjust the STUN header length, and recompute the unkeyed FINGERPRINT while the original HMAC remains valid because it covers only the message prefix. Server-side parsing in src/server/ns_turn_server.c continues past MESSAGE-INTEGRITY through handle_turn_allocate(), handle_turn_create_permission(), handle_turn_refresh(), and handle_turn_command(), allowing trailing LIFETIME, XOR-PEER-ADDRESS, or ORIGIN attributes to override allocation lifetime, inject a permission, or bypass the origin check. TLS and DTLS deployments prevent this in-transit modification. This issue is fixed in version 4.15.0. | |||||
| CVE-2026-52737 | 2026-09-09 | N/A | 5.3 MEDIUM | ||
| ZEBRA is a Zcash node written entirely in Rust. Prior to 4.5.0, a malicious unauthenticated P2P peer can answer Zebra's outbound getblocks or FindBlocks request with a small two-hash inventory and then serve a syntactically valid block whose coinbase height is far above the local chain tip. In zebrad/src/components/sync/downloads.rs, BlockDownloadVerifyError::AboveLookaheadHeightLimit originally carried only the block height and hash, so handle_block_response could not attribute the failure to the advertising peer. The error then reached the restart-worthy default path in zebrad/src/components/sync.rs, cancelling all in-flight downloads from honest peers and imposing a 67-second sync restart delay on mainnet. Because the peer was neither scored nor disconnected, the peer could repeat the cycle indefinitely with minimal bandwidth and significantly degrade synchronization without corrupting state. This issue is fixed in version 4.5.0. | |||||
| CVE-2026-71858 | 2026-09-09 | N/A | N/A | ||
| Notepad++ is a free and open-source source code editor. Prior to 8.9.7, macros loaded from an attacker-controlled shortcuts.xml bypass the HMAC validation applied to UserDefinedCommands and can invoke Scintilla actions and the internal Open in Default Viewer command in an elevated Notepad++ process, allowing protected file modification and conditional elevated command execution when a local attacker influences settingsDir and a user triggers the macro. This issue is fixed in version 8.9.7. | |||||
| CVE-2026-53728 | 2026-09-09 | N/A | 7.1 HIGH | ||
| Medplum is a developer platform that enables development of healthcare apps. Prior to version 5.1.6, the external identity provider callback at GET /auth/external accepts attacker-controlled redirect URIs that only need to start with a registered client redirect URI, rather than matching exactly. After a successful external IdP login, the server appends Medplum login and code values to that attacker-supplied URL and issues a redirect. Because the external login request state is serialized as raw JSON and later trusted by the callback, an attacker who can tamper with state.redirectUri can cause Medplum to redirect authorization artifacts to an attacker-controlled endpoint. When the registered redirect URI is a bare origin or another prefix that can be extended into a different hostname, this becomes a cross-origin authorization code leak. This issue has been patched in version 5.1.6. | |||||
| CVE-2026-55663 | 2026-09-09 | N/A | 5.6 MEDIUM | ||
| mediasoup is a WebRTC video conferencing system. From version 3.20.0 until 3.20.6 for the npm package and from 0.22.0 until 0.22.5 for the Rust crate, mediasoup's built-in SCTP stack authenticates state cookies using only the hardcoded msworker and 0xAD81 magic values instead of a per-instance secret and HMAC, contrary to RFC 9260 Section 5.1.3. The cookie structure and validation in worker/include/RTC/SCTP/association/StateCookie.hpp and worker/src/RTC/SCTP/association/StateCookie.cpp allow an on-path attacker targeting PlainTransport or PipeTransport with SCTP enabled and without DTLS protection to forge a COOKIE-ECHO whose packet verification tag matches the attacker-controlled localVerificationTag. The forged cookie passes StateCookie::IsMediasoupStateCookie() and Association::HandleReceivedCookieEchoChunk(), establishes an unauthorized SCTP association, and permits DataChannel message injection as a trusted peer. WebRtcTransport is not affected because its SCTP runs inside DTLS. This issue is fixed in npm version 3.20.6 and Rust crate version 0.22.5. | |||||
| CVE-2026-48105 | 2026-09-09 | N/A | N/A | ||
| Arc is an open, SQL-native time-series database for telemetry. Prior to version 26.06.1, Arc Enterprise's Raft FSM (`internal/cluster/raft/fsm.go:applyRegisterFile`) accepts attacker-chosen file paths in manifest-registration proposals without validating them against the configured storage backend. The only check is that the path is non-empty. There is no parent-traversal (`..`) rejection, no allowlist of legitimate prefixes, no scheme restriction (`s3://` vs local), and no length bound. This is fixed in 2026.06.1. Some workarounds are available. Restrict cluster network access to known-trusted peers via strict firewall rules, audit the cluster manifest for unexpected paths (any path not matching the configured storage backend root is suspect), and/or disable cluster mode until the fix is available. | |||||
| CVE-2026-48106 | 2026-09-09 | N/A | N/A | ||
| Arc is an open, SQL-native time-series database for telemetry. Prior to version 26.06.1, Arc Enterprise's cluster replication receiver at `internal/cluster/replication/receiver.go` validates only the wire-format envelope (length, opcode) of inbound messages. The `MsgReplicateSync` payload itself is accepted without any application-layer authentication — no HMAC, no signature, no per-message nonce. The replication stream is protected at the transport layer by TLS / mTLS, but there is no protection against application-layer message tampering or replay once a peer is on the cluster network. This is fixed in 2026.06.1. Some workarounds are available. Restrict cluster network access to known-trusted peers via strict firewall rules, audit replication logs for unexpected `MsgReplicateSync` traffic, and/or disable cluster mode until the fix is available. | |||||
| CVE-2026-75509 | 2026-09-09 | N/A | 6.5 MEDIUM | ||
| joserfc is a Python library that provides an implementation of several JSON Object Signing and Encryption (JOSE) standards. Prior to version 1.7.3, JWTClaimsRegistry applies membership matching to list-valued iss and sub claims, allowing an array-valued iss that contains the expected issuer to pass an intended equality check and enabling issuer-validation bypass. This issue is fixed in version 1.7.3. | |||||
| CVE-2026-47664 | 2026-09-09 | N/A | N/A | ||
| Pathling is a set of tools that make it easier to use FHIR and clinical terminology within health data analytics. Prior to version 2.0.0 of Pathling Server, the `$import-pnp` operation in Pathling Server accepts a caller-supplied `exportUrl` and uses it as the remote FHIR Bulk Export endpoint without constraining it to a trusted source. When PNP credentials are configured, Pathling builds a credentialed bulk-export client targeting the caller-chosen host, downloads manifest-selected files, and then reclassifies those staged files as trusted local `file://` imports - bypassing the configured `allowableSources` allowlist that protects the ordinary `$import` operation. This is fixed in Pathling Server 2.0.0. As a workaround, disable the `$import-pnp` operation (`pathling.operations.importPnpEnabled=false`) or do not configure PNP credentials. | |||||