Total
146 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-13199 | 2026-07-07 | N/A | 4.0 MEDIUM | ||
| EEPROM firmware on Raspberry Pi 5 and Compute Module 5 devices produced non-random KASLR and RNG seed values. This resulted in consistent kernel addresses across boots and devices, potentially making it easier to exploit other vulnerabilities. Additionally, the low-quality RNG seed may affect the quality of random numbers or delay booting while sufficient entropy is accumulated from other sources. | |||||
| CVE-2024-53522 | 2026-07-05 | N/A | 7.5 HIGH | ||
| Bangkok Medical Software HOSxP XE v4.64.11.3 was discovered to contain a hardcoded IDEA Key-IV pair in the HOSxPXE4.exe and HOS-WIN32.INI components. This allows attackers to access sensitive information. | |||||
| CVE-2023-37822 | 1 Eufy | 2 Homebase 2, Homebase 2 Firmware | 2026-07-05 | N/A | 8.2 HIGH |
| The Eufy Homebase 2 before firmware version 3.3.4.1h creates a dedicated wireless network for its ecosystem, which serves as a proxy to the end user's primary network. The WPA2-PSK generation of this dedicated network is flawed and solely based on the serial number. Due to the flawed generation process, the WPA2-PSK can be brute forced offline within seconds. This vulnerability allows an attacker in proximity to the dedicated wireless network to gain unauthorized access to the end user's primary network. The only requirement of the attack is proximity to the dedicated wireless network. | |||||
| CVE-2026-4930 | 2026-06-25 | N/A | N/A | ||
| SYMCRYPTO is the SiXG301's host side hardware engine accessed by PSA crypto library that accelerates symmetric cryptographic operations (AES encryption/decryption and hashing). DPA Countermeasures on SYMCRYPTO can be weakened (reduced entropy) by forcing certain seed values if an attacker gains code execution capability on the impacted device. * Therefore, the keys loaded on SYMCRYPTO may be more vulnerable to extraction through DPA attacks than intended | |||||
| CVE-2026-8700 | 2026-06-17 | N/A | 7.3 HIGH | ||
| Crypt::DSA versions before 1.20 for Perl generate seeds using rand. Seeds were generated using Perl's built-in rand function, which is predictable and unsuitable for security usage. | |||||
| CVE-2026-4827 | 2026-06-17 | N/A | N/A | ||
| CWE‑331: Insufficient Entropy vulnerability exists that could lead to unauthorized access when an attacker on the network can exploit weaknesses in session‑management protections. | |||||
| CVE-2026-46474 | 2026-06-17 | N/A | 7.5 HIGH | ||
| Trog::TOTP versions before 1.006 for Perl generate secrets using rand. Secrets were generated using Perl's built-in rand function, which is predictable and unsuitable for security usage. | |||||
| CVE-2026-42155 | 2026-06-17 | N/A | N/A | ||
| Magento Long Term Support (LTS) is an unofficial, community-driven project provides an alternative to the Magento Community Edition e-commerce platform with a high level of backward compatibility. Prior to 20.18.0, the XML-RPC / SOAP API session ID is generated using an outdated, time-based construction rather than a Cryptographically Secure Pseudo-Random Number Generator (CSPRNG). All inputs to the MD5 hash are time-derived and non-secure. Because the resulting digest relies entirely on the timestamp and the PHP internal LCG state, the effective entropy is severely constrained. This violates the OWASP ASVS v4 requirement of ≥ 64 bits of entropy (V3.2.2) and NIST SP 800-63B standards. By narrowing the LCG window (via server state leaks or general predictability) and leveraging the lack of API rate-limiting, an attacker can generate a localized pool of candidate MD5 hashes and execute a high-speed online brute-force attack to hijack active API sessions. This vulnerability is fixed in 20.18.0. | |||||
| CVE-2026-34236 | 1 Auth0 | 1 Auth0-php | 2026-06-17 | N/A | 8.2 HIGH |
| Auth0-PHP is a PHP SDK for Auth0 Authentication and Management APIs. From version 8.0.0 to before version 8.19.0, in applications built with the Auth0 PHP SDK, cookies are encrypted with insufficient entropy, which may result in threat actors brute-forcing the encryption key and forging session cookies. This issue has been patched in version 8.19.0. | |||||
| CVE-2026-2878 | 1 Progress | 1 Telerik Ui For Asp.net Ajax | 2026-06-17 | N/A | 5.3 MEDIUM |
| In Progress® Telerik® UI for AJAX, versions prior to 2026.1.225, an insufficient entropy vulnerability exists in RadAsyncUpload, where a predictable temporary identifier, based on timestamp and filename, can enable collisions and file content tampering. | |||||
| CVE-2026-2541 | 2026-06-17 | N/A | N/A | ||
| The Micca KE700 system relies on a 6-bit portion of an identifier for authentication within rolling codes, providing only 64 possible combinations. This low entropy allows an attacker to perform a brute-force attack against one component of the rolling code. Successful exploitation simplify an attacker to predict the next valid rolling code, granting unauthorized access to the vehicle. | |||||
| CVE-2026-22698 | 1 Rustcrypto | 1 Sm2 Elliptic Curve | 2026-06-17 | N/A | 7.5 HIGH |
| RustCrypto: Elliptic Curves is general purpose Elliptic Curve Cryptography (ECC) support, including types and traits for representing various elliptic curve forms, scalars, points, and public/secret keys composed thereof. In versions 0.14.0-pre.0 and 0.14.0-rc.0, a critical vulnerability exists in the SM2 Public Key Encryption (PKE) implementation where the ephemeral nonce k is generated with severely reduced entropy. A unit mismatch error causes the nonce generation function to request only 32 bits of randomness instead of the expected 256 bits. This reduces the security of the encryption from a 128-bit level to a trivial 16-bit level, allowing a practical attack to recover the nonce k and decrypt any ciphertext given only the public key and ciphertext. This issue has been patched via commit e4f7778. | |||||
| CVE-2026-1814 | 2026-06-17 | N/A | N/A | ||
| Rapid7 Nexpose versions 6.4.50 and later are vulnerable to an insufficient entropy issue in the CredentialsKeyStorePassword.generateRandomPassword() method. When updating legacy keystore passwords, the application generates a new password with insufficient length (7-12 characters) and a static prefix 'p', resulting in a weak keyspace. An attacker with access to the nsc.ks file can brute-force this password using consumer-grade hardware to decrypt stored credentials. | |||||
| CVE-2025-7432 | 2026-06-17 | N/A | N/A | ||
| DPA countermeasures in Silicon Labs' Series 2 devices are not reseeded under certain conditions. This may allow an attacker to eventually extract secret keys through a DPA attack. | |||||
| CVE-2025-6931 | 1 Dlink | 4 Dcs-6517, Dcs-6517 Firmware, Dcs-7517 and 1 more | 2026-06-17 | 2.6 LOW | 3.7 LOW |
| A vulnerability classified as problematic was found in D-Link DCS-6517 and DCS-7517 up to 2.02.0. Affected by this vulnerability is the function generate_pass_from_mac of the file /bin/httpd of the component Root Password Generation Handler. The manipulation leads to insufficient entropy. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer. | |||||
| CVE-2025-67504 | 1 Wbce | 1 Wbce Cms | 2026-06-17 | N/A | 9.1 CRITICAL |
| WBCE CMS is a content management system. Versions 1.6.4 and below use function GenerateRandomPassword() to create passwords using PHP's rand(). rand() is not cryptographically secure, which allows password sequences to be predicted or brute-forced. This can lead to user account compromise or privilege escalation if these passwords are used for new accounts or password resets. The vulnerability is fixed in version 1.6.5. | |||||
| CVE-2025-66565 | 1 Gofiber | 1 Utils | 2026-06-17 | N/A | 9.8 CRITICAL |
| Fiber Utils is a collection of common functions created for Fiber. In versions 2.0.0-rc.3 and below, when the system's cryptographic random number generator (crypto/rand) fails, both functions silently fall back to returning predictable UUID values, including the zero UUID "00000000-0000-0000-0000-000000000000". The vulnerability occurs through two related but distinct failure paths, both ultimately caused by crypto/rand.Read() failures, compromising the security of all Fiber applications using these functions for security-critical operations. This issue is fixed in version 2.0.0-rc.4. | |||||
| CVE-2025-62774 | 2026-06-17 | N/A | 3.1 LOW | ||
| On Mercku M6a devices through 2.1.0, the authentication system uses predictable session tokens based on timestamps. | |||||
| CVE-2025-59015 | 1 Typo3 | 1 Typo3 | 2026-06-17 | N/A | 6.5 MEDIUM |
| A deterministic three‑character prefix in the Password Generation component of TYPO3 CMS versions 12.0.0–12.4.36 and 13.0.0–13.4.17 reduces entropy, allowing attackers to carry out brute‑force attacks more quickly. | |||||
| CVE-2025-54885 | 2026-06-17 | N/A | N/A | ||
| Thinbus Javascript Secure Remote Password is a browser SRP6a implementation for zero-knowledge password authentication. In versions 2.0.0 and below, a protocol compliance bug causes the client to generate a fixed 252 bits of entropy instead of the intended bit length of the safe prime (defaulted to 2048 bits). The client public value is being generated from a private value that is 4 bits below the specification. This reduces the protocol's designed security margin it is now practically exploitable. The servers full sized 2048 bit random number is used to create the shared session key and password proof. This is fixed in version 2.0.1. | |||||