Total
13727 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-71300 | 1 Apache | 1 Camel | 2026-10-12 | N/A | 9.8 CRITICAL |
| Improper input validation vulnerability in Apache Camel Atmosphere Websocket component. This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-atmosphere-websocket producer selects which connected WebSocket peers a message is delivered to through Exchange headers, and the string values of those headers sat outside the Camel namespace: websocket.connectionKey and websocket.connectionKey.list, along with websocket.sendToAll, websocket.eventType and websocket.errorType. WebsocketEndpoint extends ServletEndpoint and so inherits HttpHeaderFilterStrategy, which filters only the Camel and camel prefixes; the dotted names therefore fell outside the filtered namespace and were admitted in both directions by every HTTP-family consumer. In a route bridging an HTTP consumer into an atmosphere-websocket producer, an external sender could supply the list header and take over the producer's dispatch decision. WebsocketProducer.process tests the list header before the single-key header, so an injected value discarded the recipient the route had selected: a notification intended for one connected client could be suppressed, or delivered instead to a different client whose connection key the sender knows. The header need not be a query parameter and need not be supplied as a list literally - Camel's HTTP binding promotes a repeated header name, and a bracketed value, to a List when mapping onto the Exchange - so an ordinary inbound HTTP header is sufficient to reach the list-valued branch. This is distinct from CVE-2026-55993, which concerns the consumer-side query-parameter path in the same component. The behaviour dates back to the introduction of these constants, first released in 2.17.0, and was unchanged until this fix. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, strip the dispatch headers at the trust boundary before the producer, for example with removeHeaders(“websocket.*”) placed between the HTTP consumer and the atmosphere-websocket producer. Note that the fix renames the header string values into the Camel namespace, which is a breaking change for routes that set them by literal string: routes referencing the WebsocketConstants fields symbolically are unaffected, and the change is documented in the upgrade guides. As defence in depth, do not bridge an untrusted HTTP consumer directly into a WebSocket producer whose dispatch is header-driven without stripping the dispatch namespace first. | |||||
| CVE-2025-61583 | 1 Joni1802 | 1 Ts3 Manager | 2026-10-12 | N/A | 4.3 MEDIUM |
| TS3 Manager is modern web interface for maintaining Teamspeak3 servers. A reflected cross-site scripting vulnerability has been identified in versions 2.2.1 and earlier. The vulnerability exists in the error handling mechanism of the login page, where malicious scripts embedded in server hostnames are executed in the victim's browser context without proper sanitization. This issue is fixed in version 2.2.2. | |||||
| CVE-2026-16434 | 2026-10-12 | N/A | N/A | ||
| Adminer 4.6.0 through 5.5.0 (fixed in 5.5.1) contains an incomplete fix for a prior X-Forwarded-Prefix vulnerability (GHSA-8478-xrj3-h9c2). The validation guard (bootstrap.inc.php) only rejects prefixes matching ^/[^/], blocking //evil.com but allowing values such as /\evil.com whose second character is a backslash. Because browsers normalize backslash to forward slash, a network-path reference survives into REQUEST_URI and reaches cookie_path(), affecting the Set-Cookie Path attribute. Exploitation requires that clients can set the X-Forwarded-Prefix header (a misconfigured or absent reverse proxy). Impact is limited to anomalous cookie-path scoping. | |||||
| CVE-2026-59568 | 2026-10-12 | N/A | 9.1 CRITICAL | ||
| Multiple vulnerabilities on affected versions of Zscaler Client Connector allow remote code execution, giving an unauthenticated, unprivileged user the ability to execute arbitrary code in the ZCC context. | |||||
| CVE-2025-61582 | 1 Joni1802 | 1 Ts3 Manager | 2026-10-12 | N/A | 7.5 HIGH |
| TS3 Manager is modern web interface for maintaining Teamspeak3 servers. A Denial of Dervice vulnerability has been identified in versions 2.2.1 and earlier. The vulnerability permits an unauthenticated actor to crash the application through the submission of specially crafted Unicode input, requiring no prior authentication or privileges. The flaw manifests when Unicode tag characters are submitted to the Server field on the login page. The application fails to properly handle these characters during the ASCII conversion process, resulting in an unhandled exception that terminates the application within four to five seconds of submission. This issue is fixed in version 2.2.2. | |||||
| CVE-2026-34959 | 2026-10-12 | N/A | 4.7 MEDIUM | ||
| Adminer 4.6.0 before 5.5.0 prepends the client-supplied X-Forwarded-Prefix header to $_SERVER["REQUEST_URI"] with no trusted-proxy check and no validation of the prefix value. An attacker can supply an absolute URL (e.g. X-Forwarded-Prefix: https://evil.example) that flows into Location redirect headers, the Set-Cookie path attribute, and self-referential links. This enables an authenticated open redirect after state-changing POSTs, unauthenticated control of the session cookie path attribute, and poisoning of self-referential links; CR/LF cannot be injected, so header splitting/XSS is not possible. | |||||
| CVE-2026-78329 | 1 Apache | 1 Camel | 2026-10-12 | N/A | 9.8 CRITICAL |
| Improper input validation vulnerability in Apache Camel Undertow component. This issue affects Apache Camel: from 4.11.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. UndertowEndpoint defaulted its headerFilterStrategy field to the base HttpHeaderFilterStrategy and pushed that instance into the UndertowHttpBinding it creates lazily, overwriting the UndertowHeaderFilterStrategy that DefaultUndertowHttpBinding installs in its own constructor. Unless a deployment supplied a custom binding or an explicit headerFilterStrategy, the undertow-specific filtering therefore never executed on endpoint-configured routes: the strategy object was constructed and immediately replaced before it could be consulted. The consequence is that the legacy websocket. Exchange-header prefix was not filtered at the undertow transport boundary in either direction, so an undertow HTTP consumer mapped inbound wire headers of that form onto the Exchange, where an undertow WebSocket producer reads them as dispatch directives and can be made to deliver to a peer other than the one the route selected; and header names that undertow itself does not accept were mapped onto the Exchange rather than being skipped. Rest DSL consumers were never affected, because UndertowComponent assigns UndertowRestHeaderFilterStrategy explicitly, which extends the undertow strategy. This is not a regression of CVE-2025-30177: the base HttpHeaderFilterStrategy configures the inbound Camel-prefix filter itself, so the protection introduced by that advisory continued to work through the base class and was never lost. What the change did was leave the undertow strategy orphaned on the endpoint path, with the effect that two subsequent corrections written into it - one skipping header names undertow rejects, one filtering the legacy websocket. prefix in both directions - were applied to a class the endpoint no longer used and never took effect in the releases that shipped them. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, configure the strategy explicitly rather than relying on the default, for example by binding an UndertowHeaderFilterStrategy in the registry and referencing it on the endpoint as undertow:http://0.0.0.0:8080/foo?headerFilterStrategy=#myStrategy, and additionally strip the dispatch headers at the trust boundary with removeHeaders(“websocket.*”). Note a residual limitation that upgrading does not remove: the undertow component deliberately keeps the websocket. values as part of its externally visible API contract, and UndertowProducer reads them with in.getHeader, which does not consult a HeaderFilterStrategy at all. The restored filtering is therefore defence in depth at the undertow transport boundary only. A route that carries an untrusted message from a non-undertow consumer into an undertow producer is not protected by this fix and must strip those headers itself. | |||||
| CVE-2026-59230 | 1 Apache | 1 Camel | 2026-10-12 | N/A | 6.5 MEDIUM |
| Improper input validation vulnerability in Apache Camel. This issue affects Apache Camel: from 2.17.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-mail component ships a MimeMultipart data format that can unmarshal a MIME multipart message. When it is configured with headersInline set to true, the unmarshal path copies the MIME headers of the incoming message onto the Camel message: it enumerates every header that is not one of the three standard ones it generates itself - Message-ID, MIME-Version and Content-Type - and calls setHeader for each, applying no HeaderFilterStrategy. The names of those MIME headers come from the message being unmarshalled, so a sender able to influence the message could place a header whose name falls in the Camel-internal namespace and have it set on the Exchange. Camel components read control headers from that namespace to override their configured behaviour - the camel-sql producer, for instance, takes the statement to execute from a Camel header when one is present - so an injected header could redirect what a downstream step in the route does with data the route author never intended it to take from the message. Which sinks are reachable, and what the consequences are, depends entirely on what the route does after the unmarshal step. The camel-mail consumer already applied a header filter strategy on its own inbound path, so this was the parallel inbound path into the same component that the earlier hardening did not cover. The affected copy is reached only when headersInline is enabled, which is not the default: with the default setting the MIME headers are surfaced as attachments rather than as message headers, and are not affected. The behaviour dates back to the introduction of the data format in 2.17.0 and was present on every release line until this fix. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, leave headersInline at its default of false where the inline headers are not needed, since the copy is only reached when it is enabled. Where it must stay enabled, strip Camel-internal headers immediately after the unmarshal step, for example with removeHeaders(“Camel*”) placed before any processor or producer that reads control headers, and do not unmarshal MIME content from an untrusted sender into a route that dispatches on header values. As defence in depth, treat the header names of any MIME message arriving from outside the trust boundary as untrusted input. | |||||
| CVE-2026-63621 | 1 Apache | 1 Camel | 2026-10-12 | N/A | 5.3 MEDIUM |
| Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel Knative component The Knative consumer in camel-knative maps inbound CloudEvent attributes onto Camel message headers. In binary content mode the HTTP-header path filters Camel-internal headers through KnativeHttpHeaderFilterStrategy, but in structured content mode (Content-Type application/cloudevents+json) the CloudEvent extension fields are read directly from the JSON body and every extension key is copied into the Exchange headers without applying any HeaderFilterStrategy (CloudEventProcessors, spec versions 1.0, 1.0.1 and 1.0.2). As a result, an unauthenticated attacker can inject Camel-internal headers (e.g. CamelHttpUri, CamelHttpPath, CamelFileName) via a structured-mode CloudEvent request, matched case-insensitively against Camel's header map. When a route forwards messages from a Knative consumer to a header-driven component such as camel-http or camel-file, the injected headers override configured values, enabling server-side request forgery (SSRF), path traversal or message-dispatch redirection depending on the route. This is an incomplete fix of the inbound header filtering previously added for the binary content-mode path, and is the same pattern addressed in camel-cxf/camel-knative (CVE-2026-47323), camel-undertow (CVE-2025-30177), the broader incoming-header filter (CVE-2025-27636 and CVE-2025-29891), and the non-HTTP strategies (CVE-2026-40453). This issue affects Apache Camel: from 3.15.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.4. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. The non-LTS releases 4.15.0 through 4.17.0 and 4.19.0 through 4.21.0 are affected but do not receive a maintenance fix; users on those versions should upgrade to 4.18.4 or 4.22.0. | |||||
| CVE-2026-55371 | 2026-10-12 | N/A | N/A | ||
| OpenEXR is the reference implementation and specification for the EXR high-dynamic-range image file format, widely used in the motion picture industry. Versions 3.4.0 through 3.4.12 contain a NULL pointer dereference in the OpenEXRCore function exr_attr_set_bytes(). The public setter validates the top-level exr_attr_bytes_t value pointer but does not verify that the nested type_hint pointer is non-NULL when hint_length is greater than zero. When a caller supplies a positive hint_length together with a NULL type_hint, exr_attr_bytes_create() allocates a destination type-hint buffer and then copies from the NULL source pointer, causing a deterministic crash. The flaw is reachable through the public OpenEXRCore C API and results in a denial of service. The issue is fixed in version 3.4.13. | |||||
| CVE-2025-59537 | 1 Argoproj | 1 Argo Cd | 2026-10-12 | N/A | 7.5 HIGH |
| Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. Versions 1.2.0 through 1.8.7, 2.0.0-rc1 through 2.14.19, 3.0.0-rc1 through 3.2.0-rc1, 3.1.7 and 3.0.18 are vulnerable to malicious API requests which can crash the API server and cause denial of service to legitimate clients. With the default configuration, no webhook.gogs.secret set, Argo CD’s /api/webhook endpoint will crash the entire argocd-server process when it receives a Gogs push event whose JSON field commits[].repo is not set or is null. This issue is fixed in versions 2.14.20, 3.2.0-rc2, 3.1.8 and 3.0.19. | |||||
| CVE-2025-10974 | 2026-10-11 | 6.5 MEDIUM | 6.3 MEDIUM | ||
| A vulnerability has been found in giantspatula SewKinect up to 7fd963ceb3385af3706af02b8a128a13399dffb1. This affects the function pickle.loads of the file /calculate of the component Endpoint. Such manipulation of the argument body_parts/point_cloud leads to deserialization. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. | |||||
| CVE-2025-10975 | 2026-10-11 | 6.5 MEDIUM | 6.3 MEDIUM | ||
| A vulnerability was found in GuanxingLu vlarl up to 31abc0baf53ef8f5db666a1c882e1ea64def2997. This vulnerability affects the function experiments.robot.bridge.reasoning_server::run_reasoning_server of the file experiments/robot/bridge/reasoning_server.py of the component ZeroMQ. Performing manipulation of the argument Message results in deserialization. Remote exploitation of the attack is possible. The exploit has been made public and could be used. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. | |||||
| CVE-2025-59535 | 1 Dnnsoftware | 1 Dotnetnuke | 2026-10-11 | N/A | 6.5 MEDIUM |
| DNN (formerly DotNetNuke) is an open-source web content management platform (CMS) in the Microsoft ecosystem. Prior to version 10.1.0, arbitrary themes can be loaded through query parameters. If an installed theme had a vulnerability, even if it was not used on any page, this could be loaded on unsuspecting clients without knowledge of the site owner. This issue has been patched in version 10.1.0. | |||||
| CVE-2025-10950 | 2026-10-11 | 6.5 MEDIUM | 6.3 MEDIUM | ||
| A vulnerability was determined in geyang ml-logger up to acf255bade5be6ad88d90735c8367b28cbe3a743. Affected is the function log_handler of the file ml_logger/server.py of the component Ping Handler. This manipulation of the argument data causes deserialization. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. | |||||
| CVE-2025-40836 | 1 Ericsson | 2 Indoor Connect 8855, Indoor Connect 8855 Firmware | 2026-10-11 | N/A | 9.8 CRITICAL |
| Ericsson Indoor Connect 8855 contains an improper input validation vulnerability which if exploited can allow an attacker to execute commands with escalated privileges. | |||||
| CVE-2025-10965 | 2026-10-11 | 6.5 MEDIUM | 6.3 MEDIUM | ||
| A security vulnerability has been detected in LazyAGI LazyLLM up to 0.6.1. Affected by this issue is the function lazyllm_call of the file lazyllm/components/deploy/relay/server.py. Such manipulation leads to deserialization. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. | |||||
| CVE-2025-52905 | 1 Totolink | 2 X6000r, X6000r Firmware | 2026-10-11 | N/A | 7.5 HIGH |
| Improper Input Validation vulnerability in TOTOLINK X6000R allows Flooding.This issue affects X6000R: through V9.4.0cu.1360_B20241207. | |||||
| CVE-2025-11273 | 2026-10-11 | 6.5 MEDIUM | 6.3 MEDIUM | ||
| A vulnerability was found in LaChatterie Verger up to 1.2.10. This impacts the function redirectToAuthorization of the file /src/main/services/mcp/oauth/provider.ts. The manipulation of the argument URL results in deserialization. The attack can be executed remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. | |||||
| CVE-2025-13826 | 2026-10-11 | N/A | N/A | ||
| Zervit's portable HTTP/web server is vulnerable to remote DoS attacks when a configuration reset request is made. The vulnerability is caused by inadequate validation of user-supplied input. An attacker can exploit this vulnerability by sending malicious requests. If the vulnerability is successfully exploited, the application can be made to stop responding, resulting in a DoS condition. It is possible to manually restart the application. | |||||