Total
13727 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-71417 | 2026-10-19 | N/A | 6.5 MEDIUM | ||
| PocketMine-MP before 5.32.1 fails to validate uniqueness of pack UUIDs in ResourcePackClientResponsePacket STATUS_SEND_PACKS handling, allowing authenticated clients to trigger duplicate pack transmissions. Attackers can send multiple copies of valid pack UUIDs in a single packet to exhaust server memory and cause denial of service. | |||||
| CVE-2025-59301 | 1 Deltaww | 2 Dvp15mc11t, Dvp15mc11t Firmware | 2026-10-19 | N/A | 4.0 MEDIUM |
| Delta Electronics DVP15MC11T lacks proper validation of the modbus/tcp packets and can lead to denial of service. | |||||
| CVE-2026-68206 | 2026-10-19 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate HEVC active reference counts HEVC slice parameters are shared stateless V4L2 controls, but the common validation path does not verify the active L0/L1 reference counts before driver-specific code consumes them. The original report came from Cedrus, but the active count bounds are not Cedrus-specific. Validate them in the common HEVC slice control path so stateless HEVC drivers get the same basic guarantees as soon as the control is queued. Do not reject ref_idx_l0/ref_idx_l1 entries here. Existing userspace may use out-of-range sentinel values such as 0xff for missing references, and some hardware can use that information for concealment. Keep this common check limited to the active reference counts. | |||||
| CVE-2026-68199 | 2026-10-19 | N/A | 8.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix OOB access from firmware ADDBA window size aggr_recv_addba_req_evt() logs a debug message when the firmware-supplied win_sz is outside [AGGR_WIN_SZ_MIN, AGGR_WIN_SZ_MAX] but does not return. The out-of-range win_sz is then used in TID_WINDOW_SZ() to compute a kzalloc size and stored in rxtid->hold_q_sz, leading to zero-size or overflowed allocations and subsequent out-of-bounds access. Clean up any previously active aggregation session for the TID first, then return early when win_sz is out of the valid range, instead of proceeding with a broken allocation size. | |||||
| CVE-2026-68155 | 2026-10-19 | N/A | 7.5 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: libceph: Reject monmaps advertising zero monitors A message of type CEPH_MSG_MON_MAP contains a monmap that is sent from a monitor to the client. This monmap contains information about the existing monitors in the cluster. Currently, a monmap indicating that there are zero monitors in the cluster is treated as valid. However, it is impossible to have zero monitors in the cluster and still receive a valid monmap from a monitor. Therefore, such a monmap must be corrupted and should be treated as invalid. Furthermore, a monmap with a monitor count of zero can subsequently crash the client when attempting to open a session with a monitor in __open_session(). This happens because the "BUG_ON(monc->monmap->num_mon < 1)" assertion in pick_new_mon() is triggered. This patch extends a check in ceph_monmap_decode() to also reject arriving mon_maps with num_mon == 0 rather than only with num_mon > CEPH_MAX_MON. [ idryomov: drop "log output for unusual values of num_mon" part ] | |||||
| CVE-2026-68154 | 2026-10-19 | N/A | 9.8 CRITICAL | ||
| In the Linux kernel, the following vulnerability has been resolved: libceph: reject zero bucket types in crush_decode CRUSH bucket type 0 is reserved for devices. The mapper relies on that invariant and uses type 0 to identify leaf devices. If crush_decode() accepts a bucket with type 0, a malformed CRUSH map can make the mapper treat a negative bucket ID as a device and pass it to is_out(), which then indexes the OSD weight array with a negative value. Reject zero bucket types while decoding the CRUSH map so the invalid state never reaches the mapper. | |||||
| CVE-2026-68131 | 2026-10-19 | N/A | 7.5 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: rbd: Reset positive result codes to zero in object map update path In a reply message to an RBD request, a positive result code indicates a data payload, which is not allowed for writes. While rbd_osd_req_callback() already resets a positive result code for writes to zero, rbd_object_map_callback() does not. This allows a corrupted reply to an object map update to trigger the rbd_assert(*result < 0) in __rbd_obj_handle_request(). This happens, because rbd_object_map_callback() calls rbd_obj_handle_request() -> __rbd_obj_handle_request() and passes this positive result code. From __rbd_obj_handle_request(), rbd_obj_advance_write() is called, which leaves the positive result code unchanged and returns true. Therefore, the if(done && *result) branch is executed in __rbd_obj_handle_request() and the assertion triggers. This patch fixes the issue by adjusting the logic in the rbd_object_map_callback() path. A positive result code for an object map update is now reset to zero (similar to rbd_osd_req_callback()), and the message is subsequently handled the same way as if the result code was zero from the beginning. Additionally, a WARN_ON_ONCE() is added for this case. | |||||
| CVE-2026-64379 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: mask server-provided mode to 07777 in modefromsid When modefromsid is active, parse_dacl() applies the server-provided sub_auth[2] value from the NFS mode SID to cf_mode without masking to 07777. Apply the correct masking, same as in the read path. | |||||
| CVE-2026-64114 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: raw: reject IP_HDRINCL packets with ihl < 5 raw_send_hdrinc() validates that the caller-supplied IPv4 header fits within the message length: iphlen = iph->ihl * 4; err = -EINVAL; if (iphlen > length) goto error_free; if (iphlen >= sizeof(*iph)) { /* fix up saddr, tot_len, id, csum, transport_header */ } It does not, however, reject ihl < 5. For such a packet the "if (iphlen >= sizeof(*iph))" branch is skipped, leaving the crafted iphdr untouched, but the packet is still handed to __ip_local_out() and onward. Downstream consumers that read iph->ihl assume a sane value: net/ipv4/ah4.c:ah_output() in particular subtracts sizeof(struct iphdr) from top_iph->ihl * 4 and passes the (signed-int-negative, then cast to size_t) result to memcpy(), producing an OOB access of length close to SIZE_MAX and a host kernel panic. An IPv4 header with ihl < 5 is malformed by definition (RFC 791: "Internet Header Length is the length of the internet header in 32 bit words ... Note that the minimum value for a correct header is 5."). The kernel should not be willing to inject such a packet into its own output path. Reject "iphlen < sizeof(*iph)" alongside the existing "iphlen > length" check. This matches the principle that locally constructed packets that re-enter the IP stack must pass the same basic sanity tests that a foreign packet would be subjected to. Once this lands, the "if (iphlen >= sizeof(*iph))" wrapper around the fixup branch becomes redundant; left in place to keep the patch minimal and backport-friendly. A follow-up can unwrap it. Note that commit 86f4c90a1c5c ("ipv4, ipv6: ensure raw socket message is big enough to hold an IP header") ensures the message buffer is large enough to hold an iphdr, but does not constrain the self-reported iph->ihl. Reachability: the malformed packet source is any caller with CAP_NET_RAW, including an unprivileged process in a user+net namespace on a kernel with CONFIG_USER_NS=y. The reproduced AH crash also requires a matching xfrm AH policy on the outgoing route; a container granted CAP_NET_ADMIN can install that state and policy in its netns. Loopback bypasses xfrm_output, so the trigger uses a real netdev. Reproduced on UML + KASAN: kernel-mode fault at addr 0x0 with memcpy_orig at the crash site. Same shape reproduces inside a rootless Docker container with --cap-add NET_ADMIN on a stock distro kernel. | |||||
| CVE-2026-64106 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 9.0 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-its: Reject restored DTE with out-of-range num_eventid_bits Userspace can restore an ITS Device Table Entry whose Size field encodes more EventID bits than the virtual ITS supports. The live MAPD path rejects that state, but vgic_its_restore_dte() accepts it and stores the out-of-range value in dev->num_eventid_bits. Reject restored DTEs with num_eventid_bits > VITS_TYPER_IDBITS before allocating the device. This mirrors the MAPD check and prevents the restored state from reaching vgic_its_restore_itt(), where the unchecked value can be converted into an oversized scan_its_table() range. | |||||
| CVE-2026-64046 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: net: tls: prevent chain-after-chain in plain text SG Sashiko points out that if end = 0 (start != 0) the current code will create a chain link to content type right after the wrap link: This would create a chain where the wrap link points directly to another chain link. The scatterlist API sg_next iterator does not recursively resolve consecutive chain links. meaning this is illegal input to crypto. The wrapping link is unnecessary if end = 0. end is the entry after the last one used so end = 0 means there's nothing pushed after the wrap: end start i v v v [ ]...[ ][ d ][ d ][ d ][ d ][rsv for wrap] Skip the wrapping in this case. TLS 1.3 can use the "wrapping slot" for it's chaining if end = 0. This avoids the chain-after-chain. Move the wrap chaining before marking END and chaining off content type, that feels like more logical ordering to me, but should not matter from functional perspective. | |||||
| CVE-2026-64037 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: fix TSO segmentation explosion when AMSDU is disabled When the TLC notification disables AMSDU for a TID, the MLD driver sets max_tid_amsdu_len to the sentinel value 1. The TSO segmentation path in iwl_mld_tx_tso_segment() checks for zero but not for this sentinel, allowing it to reach the num_subframes calculation: num_subframes = (max_tid_amsdu_len + pad) / (subf_len + pad) = (1 + 2) / (1534 + 2) = 0 This zero propagates to iwl_tx_tso_segment() which sets: gso_size = num_subframes * mss = 0 Calling skb_gso_segment() with gso_size=0 creates over 32000 tiny segments from a single GSO skb. This floods the TX ring with ~1024 micro-frames (the rest are purged), creating a massive burst of TX completion events that can lead to memory corruption and a subsequent use-after-free in TCP's retransmit queue (refcount underflow in tcp_shifted_skb, NULL deref in tcp_rack_detect_loss). The MVM driver is immune because it checks mvmsta->amsdu_enabled before reaching the num_subframes calculation. The MLD driver has no equivalent bitmap check and relies solely on max_tid_amsdu_len, which does not catch the sentinel value. Fix this by detecting the sentinel value (max_tid_amsdu_len == 1) at the existing check and falling back to non-AMSDU TSO segmentation. Also add a WARN_ON_ONCE guard after the num_subframes division as defense-in-depth to catch any future code paths that produce zero through a different mechanism. | |||||
| CVE-2026-109770 | 2026-10-19 | N/A | 6.1 MEDIUM | ||
| Spoofing issue in the DOM: Web Serial component. This vulnerability was fixed in Firefox 158, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. | |||||
| CVE-2026-76739 | 2026-10-19 | N/A | 4.3 MEDIUM | ||
| A potential security vulnerability in HPE Compute Scale-up Server 3200 and 3250 platforms and Superdome Flex server could be remotely exploited to list and modify RMC filesystem. | |||||
| CVE-2025-51619 | 2026-10-19 | N/A | 5.5 MEDIUM | ||
| A vulnerability in the Thesycon DPC Latency Checker driver (dpc.sys) thru 1.4.0 allows local unprivileged users to cause a denial-of-service (BSOD) condition on Windows systems. The driver exposes an IOCTL interface (0x81772008) that accepts user-controlled input without validating pointers before passing them to kernel APIs. Specifically, it dereferences a user-supplied pointer and uses the resulting value in a call to ExSetTimerResolution, leading to an arbitrary kernel memory access. Exploiting this flaw results in a system crash. | |||||
| CVE-2025-52347 | 2026-10-19 | N/A | 7.8 HIGH | ||
| An issue in the component DirectIo64.sys of PassMark BurnInTest v11.0 Build 1011, OSForensics v11.1 Build 1007, and PerformanceTest v11.1 Build 1004 allows attackers to access kernel memory and escalate privileges via a crafted IOCTL 0x8011E044 call. | |||||
| CVE-2026-108121 | 2026-10-19 | N/A | N/A | ||
| Brian Mariani from DigitalCanion SA has discovered a vulnerability in the domain creation functionality of koozali's SME Server version 11.0rc1-215, allowing an attacker with high privileges to inject reserved Apache configuration directives, corrupting httpd.conf and preventing Apache from starting after a server reboot, resulting in a denial-of-service (DoS) condition affecting the web server and its hosted virtual hosts. | |||||
| CVE-2026-110034 | 2026-10-19 | N/A | 3.7 LOW | ||
| The Salon Booking System WordPress plugin before 10.31.11 does not enforce a minimum of zero when subtracting a fixed-amount discount from a booking's total, allowing an unauthenticated visitor who knows a valid discount code to create a confirmed booking stored with a negative total. | |||||
| CVE-2026-53392 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4/flexfiles: reject zero filehandle version count ff_layout_alloc_lseg() decodes the filehandle-version array count from the flexfiles layout body. The value is used as the count for kzalloc_objs(), and the current code only rejects NULL. A zero count yields ZERO_SIZE_PTR, which can be stored in dss_info->fh_versions even though later flexfiles paths assume that at least one filehandle version exists. Reject fh_count == 0 before the allocation, matching the existing zero version_count validation in the flexfiles GETDEVICEINFO parser. A QEMU/KASAN run with a malformed flexfiles layout hit: KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:ff_layout_encode_ff_layoutupdate.isra.0+0x15f/0x750 ff_layout_encode_layoutreturn+0x683/0x970 nfs4_xdr_enc_layoutreturn+0x278/0x3a0 Kernel panic - not syncing: Fatal exception The patched kernel rejects the malformed layout without KASAN/oops/panic, and a valid fh_count=1 regression still opens, reads, and unmounts cleanly. | |||||
| CVE-2026-53369 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 8.4 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: udf: reject descriptors with oversized CRC length udf_read_tagged() skips CRC verification when descCRCLength + sizeof(struct tag) exceeds the block size. A crafted UDF image can set descCRCLength to an oversized value to bypass CRC validation entirely; the descriptor is then accepted based solely on the 8-bit tag checksum, which is trivially recomputable. Reject such descriptors instead of silently accepting them. A legitimate single-block descriptor should never have a CRC length that exceeds the block. | |||||