Total
4087 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-3678 | 1 Tenda | 2 Fh451, Fh451 Firmware | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability was determined in Tenda FH451 1.0.0.9. Affected is the function sub_3C434 of the file /goform/AdvSetWan. This manipulation of the argument wanmode/PPPOEPassword causes stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. | |||||
| CVE-2026-3677 | 1 Tenda | 2 Fh451, Fh451 Firmware | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability was found in Tenda FH451 1.0.0.9. This impacts the function fromSetCfm of the file /goform/setcfm. The manipulation of the argument funcname/funcpara1 results in stack-based buffer overflow. The attack may be performed from remote. The exploit has been made public and could be used. | |||||
| CVE-2026-3613 | 1 Wavlink | 2 Wl-nu516u1, Wl-nu516u1 Firmware | 2026-06-17 | 8.3 HIGH | 7.2 HIGH |
| A vulnerability was identified in Wavlink WL-NU516U1 V240425. This vulnerability affects the function sub_401A0C of the file /cgi-bin/login.cgi. Such manipulation of the argument ipaddr leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure. | |||||
| CVE-2026-3439 | 1 Sonicwall | 33 Nsa 2700, Nsa 2800, Nsa 3700 and 30 more | 2026-06-17 | N/A | 4.9 MEDIUM |
| A post-authentication Stack-based Buffer Overflow vulnerability in SonicOS certificate handling allows a remote attacker to crash a firewall. | |||||
| CVE-2026-3400 | 1 Tenda | 2 Ac15, Ac15 Firmware | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| A security flaw has been discovered in Tenda AC15 up to 15.13.07.13. Affected by this issue is some unknown functionality of the file /goform/TextEditingConversion. The manipulation of the argument wpapsk_crypto2_4g results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. | |||||
| CVE-2026-3137 | 1 Codeastro | 1 Food Ordering System | 2026-06-17 | 4.3 MEDIUM | 5.3 MEDIUM |
| A security vulnerability has been detected in CodeAstro Food Ordering System 1.0. This affects an unknown function of the file food_ordering.exe. Such manipulation leads to stack-based buffer overflow. The attack can only be performed from a local environment. The exploit has been disclosed publicly and may be used. | |||||
| CVE-2026-3044 | 1 Tenda | 2 Ac8, Ac8 Firmware | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability has been found in Tenda AC8 16.03.34.06. This affects the function webCgiGetUploadFile of the file /cgi-bin/UploadCfg of the component Httpd Service. The manipulation of the argument boundary leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. | |||||
| CVE-2026-39457 | 1 Freebsd | 1 Freebsd | 2026-06-17 | N/A | 7.8 HIGH |
| When exchanging data over a socket, libnv uses select(2) to wait for data to arrive. However, it does not verify whether the provided socket descriptor fits in select(2)'s file descriptor set size limit of FD_SETSIZE (1024). An attacker who is able to force a libnv application to allocate large file descriptors, e.g., by opening many descriptors and executing a program which is not careful to close them upon startup, can trigger stack corruption. If the target application is setuid-root, then this could be used to elevate local privileges. | |||||
| CVE-2026-38422 | 2026-06-17 | N/A | 7.3 HIGH | ||
| Buffer Overflow vulnerability in arendst Tasmota v.15.3.0.3 and before allows a remote attacker to execute arbitrary code via the tasmota/tasmota_xdrv_driver/xdrv_10_scripter.ino, fetch_jpg() function. | |||||
| CVE-2026-37541 | 1 Openvehicles | 2 Open Vehicle Monitoring System, Open Vehicle Monitoring System Firmware | 2026-06-17 | N/A | 10.0 CRITICAL |
| Buffer overflow vulnerability in Open Vehicle Monitoring System 3 (OVMS3) 3.3.005. In canformat_gvret.cpp, the length field in GVRET binary data is not properly validated, allowing remote attackers to cause a denial of service or possibly execute arbitrary code via crafted GVRET frames. | |||||
| CVE-2026-37539 | 2026-06-17 | N/A | 9.8 CRITICAL | ||
| Buffer overflow vulnerability in cannelloni v2.0.0 in CAN frame parsing in parser.cpp in function parseCANFrame, and decoder.cpp in function decodeFrame allowing remote attackers to cause a denial of service (crash) or possibly execute arbitrary code via crafted CAN FD frames. | |||||
| CVE-2026-37538 | 2026-06-17 | N/A | 7.5 HIGH | ||
| Buffer overflow vulnerability in socketcand 0.4.2 in file socketcand.c in function main allows attackers to cause a denial of service or other unspecified impacts via crafted bus_name. | |||||
| CVE-2026-37536 | 2026-06-17 | N/A | 8.8 HIGH | ||
| miaofng/uds-c commit e506334e270d77b20c0bc259ac6c7d8c9b702b7a (2016-10-05) contains a stack buffer overflow in send_diagnostic_request. A 6-byte stack buffer (MAX_DIAGNOSTIC_PAYLOAD_SIZE=6) receives memcpy at offset 1+pid_length with payload_length bytes. MAX_UDS_REQUEST_PAYLOAD_LENGTH=7, so 1+2+7=10 exceeds buffer by 4 bytes. No bounds check on payload_length before memcpy. | |||||
| CVE-2026-37530 | 1 Linuxfoundation | 1 Automotive Grade Linux | 2026-06-17 | N/A | 7.5 HIGH |
| AGL agl-service-can-low-level thru 17.1.12 contains a stack buffer overflow in the uds-c library. The send_diagnostic_request function in uds.c allocates a 6-byte stack buffer (MAX_DIAGNOSTIC_PAYLOAD_SIZE=6) but copies up to 7 bytes (MAX_UDS_REQUEST_PAYLOAD_LENGTH=7) via memcpy at an offset of 1+pid_length (2-3 bytes), resulting in 1-4 bytes of controlled stack overflow. The payload_length field (uint8_t) has no bounds check against the destination buffer. On 32-bit ARM automotive ECUs without stack canaries, this can lead to return address overwrite and RCE. | |||||
| CVE-2026-34555 | 1 Color | 1 Iccdev | 2026-06-17 | N/A | 6.2 MEDIUM |
| iccDEV provides a set of libraries and tools for working with ICC color management profiles. Prior to version 2.3.1.6, there is a stack-buffer-overflow (SBO) in CIccTagFixedNum<>::GetValues() and a related bug chain. The primary crash is an AddressSanitizer-reported WRITE of size 4 that overflows a 4-byte stack variable (rv) via the call chain CIccTagFixedNum::GetValues() -> CIccTagStruct::GetElemNumberValue(). This issue has been patched in version 2.3.1.6. | |||||
| CVE-2026-34542 | 1 Color | 1 Iccdev | 2026-06-17 | N/A | 6.2 MEDIUM |
| iccDEV provides a set of libraries and tools for working with ICC color management profiles. Prior to version 2.3.1.6, a crafted ICC profile can trigger a stack-buffer-overflow (SBO) in CIccCalculatorFunc::Apply() when processed via iccApplyNamedCmm. Under AddressSanitizer, the failure is reported as a 4-byte write stack-buffer-overflow in IccProfLib/IccMpeCalc.cpp:3873, reachable through the MPE calculator / curve set initialization path. This issue has been patched in version 2.3.1.6. | |||||
| CVE-2026-33554 | 2026-06-17 | N/A | 7.5 HIGH | ||
| ipmi-oem in FreeIPMI before 1.6.17 has exploitable buffer overflows on response messages. The Intelligent Platform Management Interface (IPMI) specification defines a set of interfaces for platform management. It is implemented by a large number of hardware manufacturers to support system management. It is most commonly used for sensor reading (e.g., CPU temperatures through the ipmi-sensors command within FreeIPMI) and remote power control (the ipmipower command). The ipmi-oem client command implements a set of a IPMI OEM commands for specific hardware vendors. If a user has supported hardware, they may wish to use the ipmi-oem command to send a request to a server to retrieve specific information. Three subcommands were found to have exploitable buffer overflows on response messages. They are: "ipmi-oem dell get-last-post-code - get the last POST code and string describing the error on some Dell servers," "ipmi-oem supermicro extra-firmware-info - get extra firmware info on Supermicro servers," and "ipmi-oem wistron read-proprietary-string - read a proprietary string on Wistron servers." | |||||
| CVE-2026-33536 | 1 Imagemagick | 1 Imagemagick | 2026-06-17 | N/A | 5.1 MEDIUM |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-18 and 6.9.13-43, due to an incorrect return value on certain platforms a pointer is incremented past the end of a buffer that is on the stack and that could result in an out of bounds write. Versions 7.1.2-18 and 6.9.13-43 patch the issue. | |||||
| CVE-2026-33491 | 1 Zenc-lang | 1 Zen C | 2026-06-17 | N/A | 7.8 HIGH |
| Zen C is a systems programming language that compiles to human-readable GNU C/C11. Prior to version 0.4.4, a stack-based buffer overflow vulnerability in the Zen C compiler allows attackers to cause a compiler crash or potentially execute arbitrary code by providing a specially crafted Zen C source file (`.zc`) with excessively long struct, function, or trait identifiers. Users are advised to update to Zen C version v0.4.4 or later to receive a patch. | |||||
| CVE-2026-33307 | 1 Mod Gnutls Project | 1 Mod Gnutls | 2026-06-17 | N/A | 7.5 HIGH |
| Mod_gnutls is a TLS module for Apache HTTPD based on GnuTLS. In versions prior to 0.12.3 and 0.13.0, code for client certificate verification imported the certificate chain sent by the client into a fixed size `gnutls_x509_crt_t x509[]` array without checking the number of certificates is less than or equal to the array size. `gnutls_x509_crt_t` is a `typedef` for a pointer to an opaque GnuTLS structure created using with `gnutls_x509_crt_init()` before importing certificate data into it, so no attacker-controlled data was written into the stack buffer, but writing a pointer after the last array element generally triggered a segfault, and could theoretically cause stack corruption otherwise (not observed in practice). Server configurations that do not use client certificates (`GnuTLSClientVerify ignore`, the default) are not affected. The problem has been fixed in version 0.12.3 by checking the length of the provided certificate chain and rejecting it if it exceeds the buffer length, and in version 0.13.0 by rewriting certificate verification to use `gnutls_certificate_verify_peers()`, removing the need for the buffer entirely. There is no workaround. Version 0.12.3 provides the minimal fix for users of 0.12.x who do not wish to upgrade to 0.13.0 yet. | |||||